HardLabs

Motor Connector

robotique-udes·Exo_Electric·ACE 2026/Motor Connector/Motor Connector.kicad_pcb

Motor Connector PCB layout, top view — open source board by robotique-udes
Simulate this board

About the Motor Connector PCB

Motor Connector is an open source PCB design by robotique-udes, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 63.3 × 30.1 mm, with 8 components from 4 distinct parts.

By type, the board carries 6 resistors and 2 connectors.

From the project

This repo contains all the information about the PCB and electrical schematics of Biogenius.

- Un dossier est créé pour chaque année de compétition - Contient un README.md décrivant le fonctionnement global du système électrique et présentant le schéma-bloc - Contient le schéma-bloc en image et dans son format original décrivant l'interaction entre les sous-systèmes électriques - Un dossier est créé par PCB - Contient un README.md qui explique le fonctionnement du PCB, contient les calculs et hypothèse fait pour le pcb et présente le schéma-bloc. Le README.md doit dire où se trouve le contour du pcb s'il a été fait sur ONSHAPE - Contient le schéma-bloc en image et dans son format…

Motor Connector bill of materials (BOM)

8 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RJ45
J1
1
MOTOR1
Conn_01x04
J2
4
600
R101, R102, R105, R106
2
110
R103, R104

Motor Connector design files

The KiCad project lives in the robotique-udes/Exo_Electric repository on GitHub; these links point at the commit this page was built from.

Motor Connector: common questions

How big is the Motor Connector PCB?

The Motor Connector measures 63.3 × 30.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Motor Connector?

8 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Motor Connector design files?

From the robotique-udes/Exo_Electric repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Motor Connector design in my own project?

Yes, under the terms of its GPL-2.0 license, which robotique-udes chose for the repository.

More boards in Exo_Electric