HardLabs

BNO BREAKOUT

robotique-udes·Exo_Electric·ACE 2026/BNOV2/BNO_BREAKOUT.kicad_pcb

BNO BREAKOUT layout, top view — open source board by robotique-udes
Simulate this board

About the BNO BREAKOUT

BNO BREAKOUT is an open source PCB design by robotique-udes, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 42 × 61.1 mm, with 10 components from 8 distinct parts.

Other key parts include the INA240A2PW. By type, the board carries 4 capacitors, 3 diodes, 1 IC, 1 connector and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This repo contains all the information about the PCB and electrical schematics of Biogenius.

- Un dossier est créé pour chaque année de compétition - Contient un README.md décrivant le fonctionnement global du système électrique et présentant le schéma-bloc - Contient le schéma-bloc en image et dans son format original décrivant l'interaction entre les sous-systèmes électriques - Un dossier est créé par PCB - Contient un README.md qui explique le fonctionnement du PCB, contient les calculs et hypothèse fait pour le pcb et présente le schéma-bloc. Le README.md doit dire où se trouve le contour du pcb s'il a été fait sur ONSHAPE - Contient le schéma-bloc en image et dans son format…

Main components on the BNO BREAKOUT

INA240A2PW

BNO BREAKOUT bill of materials (BOM)

10 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
INA240A2PW
AP7361C-33E
U3
1
MOTOR1
RJ45
J2
2
BAV99
D1, D3
1
Green_power
D5
1
1n
C2
1
0.1UF
1n
C3
2
4,7µF
C5, C6
1
330
R1

BNO BREAKOUT design files

The KiCad project lives in the robotique-udes/Exo_Electric repository on GitHub; these links point at the commit this page was built from.

BNO BREAKOUT: common questions

How big is the BNO BREAKOUT?

The BNO BREAKOUT measures 42 × 61.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BNO BREAKOUT?

10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BNO BREAKOUT design files?

From the robotique-udes/Exo_Electric repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BNO BREAKOUT design in my own project?

Yes, under the terms of its GPL-2.0 license, which robotique-udes chose for the repository.

More boards in Exo_Electric

Similar boards