MOBO DEV BreadBoard
About the MOBO DEV BreadBoard PCB
MOBO DEV BreadBoard is an open source PCB design by robotique-udes, published on GitHub under the GPL-2.0 license. It is a 4-layer board measuring 39.4 × 98.5 mm, with 35 components from 30 distinct parts.
Other key parts include the LMR51610XDBVR, TPS562242DRLR, INA240A2PW and SRV05-4. By type, the board carries 9 resistors, 8 connectors, 8 capacitors, 4 ICs, 2 inductors and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This repo contains all the information about the PCB and electrical schematics of Biogenius.
Main components on the MOBO DEV BreadBoard
MOBO DEV BreadBoard bill of materials (BOM)
35 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR51610XDBVR ~ | AMPHENOL_MDT320E01001 | U1 |
| 1 | TPS562242DRLR | SOT-563 | U2 |
| 1 | INA240A2PW AP7361C-33E | SOT-223-3_TabPin2 | U3 |
| 1 | SRV05-4 | SOT-23-6 | U301 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | Gauche | PinHeader_1x23_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | MOTOR1 Droite | PinHeader_1x23_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | USB_C_UART | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J301 |
| 1 | USB_C_DEBUG | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J302 |
| 1 | I2C_0_0 | PinHeader_1x04_P2.54mm_Vertical | J307 |
| 1 | I2C_0_1 | PinHeader_1x04_P2.54mm_Vertical | J308 |
| 1 | I2C_1_0 | PinHeader_1x04_P2.54mm_Vertical | J309 |
| 1 | I2C_1_1 | PinHeader_1x04_P2.54mm_Vertical | J310 |
| 1 | SMD0805B110TF | Fuse_0805_2012Metric | F1 |
| 1 | I2S | PinHeader_1x05_P2.54mm_Vertical | I2S |
| 1 | Green_power | D_0805_2012Metric | D1 |
| 1 | 600 @ 100MHz | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 1 | 3,3µH 20mOhm | L_TDK_VLP8040 | L1 |
| 1 | 0.1UF 10µF | C_0805_2012Metric | C1 |
| 2 | 0,1µF | C_0603_1608Metric | C2, C6 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1UF 0,1µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 4.7UF 33pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 22µF | C_0805_2012Metric | C5 |
| 2 | 4,7µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 191K 158k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10K 28k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 100 30k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 4 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R301, R302, R303, R304 |
MOBO DEV BreadBoard design files
The KiCad project lives in the robotique-udes/Exo_Electric repository on GitHub; these links point at the commit this page was built from.
MOBO DEV BreadBoard: common questions
How big is the MOBO DEV BreadBoard PCB?
The MOBO DEV BreadBoard measures 39.4 × 98.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the MOBO DEV BreadBoard?
35 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MOBO DEV BreadBoard design files?
From the robotique-udes/Exo_Electric repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MOBO DEV BreadBoard design in my own project?
Yes, under the terms of its GPL-2.0 license, which robotique-udes chose for the repository.
More boards in Exo_Electric
MoBo V2-1
100 × 90.1 mm56 parts4LGPL-2.01
ESP32BIMU V 1
40 × 35 mm45 parts4LGPL-2.01
ESP32SoM V2
30 × 46.1 mm44 parts4LGPL-2.01
ESP32Template
40 × 35 mm40 parts4LGPL-2.01
ESP32EStop
141 × 73.5 mm32 parts2LGPL-2.01
PCB BioGenius
124.5 × 94 mm19 parts2LGPL-2.01
Projet moustache
113.5 × 52.9 mm14 parts2LGPL-2.01
DaisyChainPcb V1 0
56.5 × 97 mm12 parts2LGPL-2.01
BNO BREAKOUT
42 × 61.1 mm10 parts2LGPL-2.01
Motor Connector
63.3 × 30.1 mm8 parts2LGPL-2.01
Mustachio v2
76.2 × 32.6 mm3 parts2LGPL-2.01
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446