HardLabs

PCB BioGenius

robotique-udes·Exo_Electric·ACE 2023/PCB_BioGenius.kicad_pcb

PCB BioGenius layout, top view — open source board by robotique-udes
Simulate this board

About the PCB BioGenius

PCB BioGenius is an open source PCB design by robotique-udes, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 124.5 × 94 mm, with 19 components from 10 distinct parts.

From the project

This repo contains all the information about the PCB and electrical schematics of Biogenius.

- Un dossier est créé pour chaque année de compétition - Contient un README.md décrivant le fonctionnement global du système électrique et présentant le schéma-bloc - Contient le schéma-bloc en image et dans son format original décrivant l'interaction entre les sous-systèmes électriques - Un dossier est créé par PCB - Contient un README.md qui explique le fonctionnement du PCB, contient les calculs et hypothèse fait pour le pcb et présente le schéma-bloc. Le README.md doit dire où se trouve le contour du pcb s'il a été fait sur ONSHAPE - Contient le schéma-bloc en image et dans son format…

PCB BioGenius bill of materials (BOM)

19 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Gauche
J1
1
MOTOR1
Droit
J2
1
MOTOR2
MOTOR DRIVE 2
J3
1
MOTOR3
MOTOR DRIVE 1
J4
1
MOTOR4
Relais
J5
1
BNO_Dos
J6
8
Conn_01x19
J7, J8, J9, J10, J17, J18, J19, J20
1
HMI
J11
2
Conn_01x02
J12, J15
2
Conn_02x03_Counter_Clockwise
J13, J14

PCB BioGenius design files

The KiCad project lives in the robotique-udes/Exo_Electric repository on GitHub; these links point at the commit this page was built from.

PCB BioGenius: common questions

How big is the PCB BioGenius?

The PCB BioGenius measures 124.5 × 94 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB BioGenius?

19 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB BioGenius design files?

From the robotique-udes/Exo_Electric repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB BioGenius design in my own project?

Yes, under the terms of its GPL-2.0 license, which robotique-udes chose for the repository.

More boards in Exo_Electric