HardLabs

Template

robotique-udes·Exo_Electric·Ressource/Template/Template/Template.kicad_pcb

Template PCB layout, top view — open source ESP32 board by robotique-udes
Simulate this board

About the Template PCB

Template is an open source ESP32 PCB design by robotique-udes, published on GitHub under the GPL-2.0 license. It is a 4-layer board measuring 40 × 35 mm, with 40 components from 19 distinct parts.

Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the AP7361C-33E, SN65HVD232DR and LSM6DSV16BXTR. By type, the board carries 16 capacitors, 13 resistors, 3 ICs, 3 connectors, 3 diodes and 1 crystal.

From the project

This repo contains all the information about the PCB and electrical schematics of Biogenius.

Main components on the Template

AP7361C-33ESN65HVD232DRLSM6DSV16BXTR

Template bill of materials (BOM)

40 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP7361C-33E
U101
1
SN65HVD232DR
U202
1
LSM6DSV16BXTR
U301
1
ABM8-40.000MHZ-10-D1G-T
Y201
1
USB_C_Receptacle_USB2.0_16P
J202
2
RJ45
J203, J204
1
ESP32-C3
ESP32
2
BAV99
D102, D103
1
USBLC6-2SC6
STMicroelectronics
D201
2
4,7µF
C101, C102
2
1nF
C103, C104
2
22μF
C201, C209
7
0.1μF
C202, C203, C204, C205, C208, C301, C302
2
12pF
C206, C207
1
47nF
C210
3
330Ω
R101, R209, R210
4
5.1KΩ
R201, R202, R207, R208
4
0Ω
R203, R204, R205, R206
2
50Ω
R211, R212

Template design files

The KiCad project lives in the robotique-udes/Exo_Electric repository on GitHub; these links point at the commit this page was built from.

Template: common questions

What microcontroller does the Template use?

The Template is built around the ESP32-C3, from the ESP32 family.

How big is the Template PCB?

The Template measures 40 × 35 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Template?

40 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Template design files?

From the robotique-udes/Exo_Electric repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Template design in my own project?

Yes, under the terms of its GPL-2.0 license, which robotique-udes chose for the repository.

Can I test firmware for the Template without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Exo_Electric

Similar boards