FilaBoss control PCB b
ronisillman·FilaBoss·PCB/FilaBoss_control_PCB/FilaBoss_control_PCB_b.kicad_pcb
About the FilaBoss control PCB b
FilaBoss control PCB b is an open source ESP32 PCB design by ronisillman, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 88.9 × 50.8 mm, with 24 components from 16 distinct parts.
Its main chip is the ESP32_C3_super_mini, from the ESP32 family. Other key parts include the LM78M05_TO220 and Pololu_Breakout_A4988. By type, the board carries 8 connectors, 4 resistors, 3 capacitors, 2 ICs, 2 transistors and 2 diodes.
From the project
Mechatronics Project Filament Maker
Main components on the FilaBoss control PCB b
FilaBoss control PCB b bill of materials (BOM)
24 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_C3_super_mini | ESP32-super-mini | U1 |
| 1 | LM78M05_TO220 | TO-220-3_Vertical | U2 |
| 1 | Pololu_Breakout_A4988 | Pololu_Breakout-16_15.2x20.3mm | A1 |
| 2 | IRLZ44N | TO-220-3_Vertical | Q1, Q2 |
| 2 | Conn_01x04_Encoder | JST_1x04_P2.0mm_Vertical_PTH | J1, J9 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J2, J3 |
| 1 | Barrel_Jack_PTH_Slot | Barrel_Jack_PTH_Slot | J5 |
| 1 | PinHeader_01x06_P2.54mm_Vertical_THT_D1mm | PinHeader_01x06_P2.54mm_Vertical_THT_D1mm | J6 |
| 1 | Conn_01x04 | JST_1x04_P2.0mm_Vertical_PTH | J7 |
| 1 | Conn_01x03 | 1x03_P2.54mm_Locking | J8 |
| 1 | Fuse | Fuseholder_Clip-5x20mm_Keystone_3512P_Inline_P23.62x7.27mm_D1.02x2.41x1.02x1.57mm_Horizontal | F1 |
| 2 | D | D_A-405_P10.16mm_Horizontal | D1, D2 |
| 1 | L | L_Wurth_WE-HCFT-2012_LeadDiameter1.2mm | L1 |
| 3 | C | C_Axial_L5.1mm_D3.1mm_P10.00mm_Horizontal | C1, C2, C3 |
| 2 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
FilaBoss control PCB b design files
The KiCad project lives in the ronisillman/FilaBoss repository on GitHub; these links point at the commit this page was built from.
FilaBoss control PCB b: common questions
What microcontroller does the FilaBoss control PCB b use?
The FilaBoss control PCB b is built around the ESP32_C3_super_mini, from the ESP32 family.
How big is the FilaBoss control PCB b?
The FilaBoss control PCB b measures 88.9 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FilaBoss control PCB b?
24 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the FilaBoss control PCB b design files?
From the ronisillman/FilaBoss repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FilaBoss control PCB b design in my own project?
Yes, under the terms of its Apache-2.0 license, which ronisillman chose for the repository.
Can I test firmware for the FilaBoss control PCB b without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in FilaBoss
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k