USLI Payload Motherboard
Rose-Rocketry·NASA-USLI-2023-Electrical-Payload·Motherboard/motherboard_2022_2023/motherboard_2022_2023.kicad_pcb
About the USLI Payload Motherboard PCB
USLI Payload Motherboard is an open source Raspberry Pi PCB design by Rose-Rocketry, published on GitHub under the MIT license. It is a 2-layer board measuring 109.2 × 50.8 mm, with 78 components from 42 distinct parts.
Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. Other key parts include the XBee_THT, PCA9685PW, MPL3115A2, TPS56424x and MPU-6050. By type, the board carries 21 resistors, 15 capacitors, 11 switches, 9 jumpers, 8 connectors and 6 ICs.
It belongs with the rf & radio designs in this gallery.
From the project
This repository is still in progress and houses the majority of the camera integration/functionality code for the NASA USLI 2023 Competition
This repository is still in progress and houses the majority of the camera integration/functionality code for the NASA USLI 2023 Competition
Action items as of 9/25/2022: - Add modular methods so other parts of the program can be run (i.e. "img2BW" "applySobel") - Figure out how to do command line prompting to run the program so RF payload can use our program - Prompt program to run with "[Radio Callsign] B2 A1 C3 D4 ..." - Pick out and purchase microcontroller and antenna design - Integrate camera to a microcontroller and upload code to microcontroller to run on boot (similar to systemctl)…
Main components on the USLI Payload Motherboard
USLI Payload Motherboard bill of materials (BOM)
78 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XBee_THT | XBee-THT | U1 |
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U3 |
| 1 | MPL3115A2 | NXP_LGA-8_3x5mm_P1.25mm_H1.1mm | U4 |
| 1 | TPS56424x | SOT-563 | U5 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U7 |
| 1 | MCP3004 | SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | AO4838 | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | POWER | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
| 1 | Raspberry_Pi_2_3 | PI_Zero | J2 |
| 1 | IO Expansion | PinHeader_2x04_P2.54mm_Horizontal | J3 |
| 1 | STEMMA QT | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J5 |
| 1 | SHUTDOWN | PinHeader_1x03_P2.54mm_Horizontal | J6 |
| 1 | Conn_01x22_Shielded | MOLEX 22 Pin FPC 54548-2271 | J13 |
| 1 | HDMI_C_1.4 | WURTH_685119136923 | J14 |
| 1 | Buzzer | CPI-1375-80T | BZ1 |
| 1 | PYRO_A_SENSE_BYPASS | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | PYRO_B_SENSE_BYPASS | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 6 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4, JP5, JP6, JP7, JP8 |
| 1 | PYRO_V | SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP9 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | Servo Port | PinHeader_1x03_P2.54mm_Horizontal | S0, S1, S2, S3, S4, S5, S6, S8 +2 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 2 | BZX384-C3V3,115 | D_SOD-323 | D1, D2 |
| 2 | RED | LED_0603_1608Metric | D3, D5 |
| 1 | LED_RGBA | LED_RGB_5050-6 | D4 |
| 1 | 1.8uH 9.6mOhm | L_Coilcraft_XAL60xx_6.36x6.56mm | L1 |
| 2 | 10u | C_0603_1608Metric | C1, C11 |
| 6 | 100n | C_0603_1608Metric | C2, C6, C9, C10, C12, C13 |
| 1 | 33pF | C_0603_1608Metric | C3 |
| 1 | 22uF | C_0603_1608Metric | C4 |
| 1 | 100nF | C_0603_1608Metric | C5 |
| 3 | 10n | C_0603_1608Metric | C7, C14, C15 |
| 1 | 2.2n | C_0603_1608Metric | C8 |
| 5 | 10k | R_0603_1608Metric | R1, R2, R7, R8, R17 |
| 6 | 100k | R_0603_1608Metric | R3, R9, R10, R11, R12, R16 |
| 1 | 25.5k | R_0603_1608Metric | R4 |
| 1 | 220k | R_0603_1608Metric | R5 |
| 1 | 30k | R_0603_1608Metric | R6 |
| 2 | 68 | R_0603_1608Metric | R13, R18 |
| 2 | 220 | R_0603_1608Metric | R14, R15 |
| 2 | 15 | R_0603_1608Metric | R19, R20 |
| 1 | 1k | R_0603_1608Metric | R21 |
USLI Payload Motherboard design files
The KiCad project lives in the Rose-Rocketry/NASA-USLI-2023-Electrical-Payload repository on GitHub; these links point at the commit this page was built from.
USLI Payload Motherboard: common questions
What microcontroller does the USLI Payload Motherboard use?
The USLI Payload Motherboard is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.
How big is the USLI Payload Motherboard PCB?
The USLI Payload Motherboard measures 109.2 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USLI Payload Motherboard?
78 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the USLI Payload Motherboard design files?
From the Rose-Rocketry/NASA-USLI-2023-Electrical-Payload repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USLI Payload Motherboard design in my own project?
Yes, under the terms of its MIT license, which Rose-Rocketry chose for the repository.
Can I test firmware for the USLI Payload Motherboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507