8 open source boards using the MCP3004
Real designs built with the MCP3004, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Bz hat
dvr0
140 × 85 mm48 parts2LGPL-3.053Raspberry Pi
Hardware
afms135
108.1 × 61.2 mm65 parts2LGPL-3.011Raspberry Pi
USLI Payload Motherboard
Rose-Rocketry
109.2 × 50.8 mm78 parts2LMIT0Raspberry Pi
Thermalguard hat
olivierpetitjean
95.6 × 56 mm35 parts2LMIT0Raspberry Pi
Wm8731-breakout
dvr0
72.2 × 71.1 mm39 parts2LGPL-3.053Raspberry Pi
Cage multigadget pi
limblab
65.3 × 84.6 mm29 parts2LNo license2AVR/Arduino
ECMeter
BB-KING777
69.6 × 65.5 mm52 parts2LNo license0SpectrumAnalyser
richardhosking
180 × 60 mm51 parts2LNo license1
How designs wire the MCP3004
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP3004 connects to, and the resistors, capacitors and other passives placed on it.
- The VREF pin has a decoupling capacitor on 5 of 7 designs, most often 1 µF (then 100 nF).
- The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 5, 6 | Connected to: Not connected 100% | — |
| DGNDpin 7 | Connected to: GND 100% | — |
| AGNDpin 12 | Connected to: GND 100% | — |
| VREFpin 13 | Connected to: 3.3V 86% |
|
| VDDpin 14 | Connected to: 3.3V 86% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bz hat by dvr0, Hardware by afms135, Cage multigadget pi by limblab and SpectrumAnalyser by richardhosking.
The MCP3004 in open source designs
The gallery holds 8 open source boards using the MCP3004 from 7 GitHub repositories; a typical one measures about 101.8 × 63.3 mm and carries around 50 components.
100% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Bz hat by dvr0.
Microcontrollers on boards using the MCP3004
What boards using the MCP3004 are built for
MCP3004: common questions
Where can I find a MCP3004 reference design?
Each of the 8 boards on this page is a real design using the MCP3004. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP3004 VREF pin?
The VREF pin has a decoupling capacitor on 5 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MCP3004.
What decoupling capacitors do designs use on the MCP3004 VDD pin?
The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MCP3004.
Which microcontrollers do boards using the MCP3004 use?
Most are built on Raspberry Pi (6) and AVR/Arduino (1).
How big is a typical board using the MCP3004?
The median is 101.8 × 63.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP3004?
By GitHub stars, Bz hat by dvr0, with 53 stars.
Can I simulate one of these boards using the MCP3004 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.