XIAO ESP32-S3-SMD
About the XIAO ESP32-S3-SMD PCB
XIAO ESP32-S3-SMD is an open source ESP32 PCB design by RRST-NHK-Project, published on GitHub. It is a 2-layer board measuring 34.6 × 37.9 mm, with 10 components from 7 distinct parts.
Its main chip is the XIAO-ESP32-S3-SMD, from the ESP32 family.
From the project
基板・回路関連
Main components on the XIAO ESP32-S3-SMD
XIAO ESP32-S3-SMD bill of materials (BOM)
10 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-SMD | XIAO-ESP32-S3-SMD | U2 |
| 1 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 120 |
| 2 | CONN_01X04_SOCKET Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | CAN1, CAN2 |
| 1 | ENC1 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | ENC1 |
| 1 | ENC2 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | ENC2 |
| 3 | CONN_01X03_SOCKET Conn_01x03_Socket | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | ESG1, GSE2, GSE3 |
| 1 | ~ | DIP-8_W7.62mm | MCP2561 |
XIAO ESP32-S3-SMD design files
The KiCad project lives in the RRST-NHK-Project/kicad-ws repository on GitHub; these links point at the commit this page was built from.
XIAO ESP32-S3-SMD: common questions
What microcontroller does the XIAO ESP32-S3-SMD use?
The XIAO ESP32-S3-SMD is built around the XIAO-ESP32-S3-SMD, from the ESP32 family.
How big is the XIAO ESP32-S3-SMD PCB?
The XIAO ESP32-S3-SMD measures 34.6 × 37.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XIAO ESP32-S3-SMD?
10 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the XIAO ESP32-S3-SMD design files?
From the RRST-NHK-Project/kicad-ws repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the XIAO ESP32-S3-SMD design in my own project?
The repository has no license, so all rights stay with RRST-NHK-Project. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the XIAO ESP32-S3-SMD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in kicad-ws
ESP32ESP32S3
17.8 × 21.1 mm71 parts2LNo license0
STM32CANMD-60
172 × 122 mm61 parts2LNo license0
ESP32-S3N-WROOM-32E
74.1 × 74.8 mm51 parts2LNo license0
ESP32RRST-ESP32 Rev.1
30.5 × 50.8 mm34 parts2LNo license0
ESP32RRST-ESP32-S3-Rev.2-Sense
26 × 56.9 mm34 parts4LNo license0
ESP32RRST-ESP32-S3-Rev.2
25.4 × 62.7 mm29 parts4LNo license0
ESP32RRST-ESP32-S3-Rev.1
25.4 × 62.7 mm29 parts2LNo license0
ESP32RRST-ESP32-S3-Rev.2-Core
19.8 × 44.2 mm29 parts2LNo license0
ESP32XIAO-ESP32-S3-SS
39 × 55 mm16 parts2LNo license0
ESP32XIAO-ESP32-S3-MES
39 × 43 mm12 parts2LNo license0
XIAO ESP32-S3
45 × 36 mm6 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k