XIAO-ESP32-S3-SS
About the XIAO-ESP32-S3-SS PCB
XIAO-ESP32-S3-SS is an open source ESP32 PCB design by RRST-NHK-Project, published on GitHub. It is a 2-layer board measuring 39 × 55 mm, with 16 components from 15 distinct parts.
Its main chip is the XIAO-ESP32-S3-SMD, from the ESP32 family. By type, the board carries 3 ICs and 1 resistor.
From the project
基板・回路関連
Main components on the XIAO-ESP32-S3-SS
XIAO-ESP32-S3-SS bill of materials (BOM)
16 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | DIP-8_W7.62mm | U1 |
| 1 | XIAO-ESP32-S3-SMD | XIAO-ESP32-S3-SMD | U2 |
| 1 | ~ | DIP-16_W7.62mm | U3 |
| 1 | Conn_01x02_Pin | AMASS_XT30U-M_1x02_P5.0mm_Vertical | 24V 24V |
| 2 | Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | CAN1, CAN2 |
| 1 | SV1 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SV1 |
| 1 | SV2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SV2 |
| 1 | SV3 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SV3 |
| 1 | SV4 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SV4 |
| 1 | Servo1 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Servo1 |
| 1 | Servo2 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Servo2 |
| 1 | Servo3 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Servo3 |
| 1 | Servo4 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Servo4 |
| 1 | Servo5 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Servo5 |
| 1 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
XIAO-ESP32-S3-SS design files
The KiCad project lives in the RRST-NHK-Project/kicad-ws repository on GitHub; these links point at the commit this page was built from.
XIAO-ESP32-S3-SS: common questions
What microcontroller does the XIAO-ESP32-S3-SS use?
The XIAO-ESP32-S3-SS is built around the XIAO-ESP32-S3-SMD, from the ESP32 family.
How big is the XIAO-ESP32-S3-SS PCB?
The XIAO-ESP32-S3-SS measures 39 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XIAO-ESP32-S3-SS?
16 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the XIAO-ESP32-S3-SS design files?
From the RRST-NHK-Project/kicad-ws repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the XIAO-ESP32-S3-SS design in my own project?
The repository has no license, so all rights stay with RRST-NHK-Project. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the XIAO-ESP32-S3-SS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in kicad-ws
ESP32ESP32S3
17.8 × 21.1 mm71 parts2LNo license0
STM32CANMD-60
172 × 122 mm61 parts2LNo license0
ESP32-S3N-WROOM-32E
74.1 × 74.8 mm51 parts2LNo license0
ESP32RRST-ESP32 Rev.1
30.5 × 50.8 mm34 parts2LNo license0
ESP32RRST-ESP32-S3-Rev.2-Sense
26 × 56.9 mm34 parts4LNo license0
ESP32RRST-ESP32-S3-Rev.2
25.4 × 62.7 mm29 parts4LNo license0
ESP32RRST-ESP32-S3-Rev.1
25.4 × 62.7 mm29 parts2LNo license0
ESP32RRST-ESP32-S3-Rev.2-Core
19.8 × 44.2 mm29 parts2LNo license0
ESP32XIAO-ESP32-S3-MES
39 × 43 mm12 parts2LNo license0
ESP32XIAO ESP32-S3-SMD
34.6 × 37.9 mm10 parts2LNo license0
XIAO ESP32-S3
45 × 36 mm6 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k