Ghostbie

Rudra-bhardwaj·ghostbie·pcb/ghostbie.kicad_pcb

Ghostbie PCB layout, top view — open source ESP32 board by Rudra-bhardwaj

About the Ghostbie PCB

Ghostbie is an open source ESP32 PCB design by Rudra-bhardwaj, published on GitHub. It is a 2-layer board measuring 75 × 116 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

its a digital tamogachi like pet!

1) use the given pcb files if you wanna order 2) to build it just solder the componets as my guide images 3) if you wanna make it yours in a way I recommend changing the shape of the pcb however you like. 4) and to write the firmware i recommend using arduino IDE but i use vs code with add on 5) to make it work use the given code and your all set!(i recommend personaling the the code to make it yours 6) GOOD LUCK!

Ghostbie, from the project README
From the project README

Main components on the Ghostbie

Ghostbie bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04
J1
1
Conn_01x08
J2
2
SW_Push
SW1, SW2
1
10K
R1

Ghostbie design files

The KiCad project lives in the Rudra-bhardwaj/ghostbie repository on GitHub; these links point at the commit this page was built from.

Ghostbie: common questions

What microcontroller does the Ghostbie use?

The Ghostbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Ghostbie PCB?

The Ghostbie measures 75 × 116 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ghostbie?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ghostbie design files?

From the Rudra-bhardwaj/ghostbie repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Ghostbie design in my own project?

The repository has no license, so all rights stay with Rudra-bhardwaj. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ghostbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards