MCU breakout board
RudrakshKavari107·RudrakshKavari_EnC_Inductions·MCU_breakout_board/MCU_breakout_board.kicad_pcb
About the MCU breakout board
MCU breakout board is an open source ESP32 PCB design by RudrakshKavari107, published on GitHub. It is a 2-layer board measuring 139 × 115 mm, with 23 components from 20 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. Other key parts include the GY-521 and HC-SR04. By type, the board carries 9 connectors, 4 diodes, 4 resistors, 3 ICs and 3 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Dedicated repo for KRATOS Electronics and Controls induction process
Main components on the MCU breakout board
MCU breakout board bill of materials (BOM)
23 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC-1-N8R2 | ESP32-S3-KratosInductions | U1 |
| 1 | GY-521 | MODULE_GY-521 | U2 |
| 1 | HC-SR04 | XCVR_HC-SR04 | U3 |
| 1 | GPIO Headers | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Switch Connector 1 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Battery Connectors | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Servo 1 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Servo 2 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Servo 3 | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Servo 4 | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Switch Connector 2 | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Switch Connector 3 | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Switch 1 | SW_Slide_SP3T_Straight_CK_OS103012MU1QP1 | SW1 |
| 1 | Switch 2 | SW_Slide_SP3T_Straight_CK_OS103012MU1QP1 | SW2 |
| 1 | Switch 3 | SW_Slide_SP3T_Straight_CK_OS103012MU1QP1 | SW3 |
| 1 | LED 1 | LED_D5.0mm | D1 |
| 1 | LED 2 | LED_D5.0mm | D2 |
| 1 | LED 3 | LED_D5.0mm | D3 |
| 1 | LED 4 | LED_D5.0mm | D4 |
| 4 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4 |
MCU breakout board design files
The KiCad project lives in the RudrakshKavari107/RudrakshKavari_EnC_Inductions repository on GitHub; these links point at the commit this page was built from.
MCU breakout board: common questions
What microcontroller does the MCU breakout board use?
The MCU breakout board is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.
How big is the MCU breakout board?
The MCU breakout board measures 139 × 115 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MCU breakout board?
23 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the MCU breakout board design files?
From the RudrakshKavari107/RudrakshKavari_EnC_Inductions repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MCU breakout board design in my own project?
The repository has no license, so all rights stay with RudrakshKavari107. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MCU breakout board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in RudrakshKavari_EnC_Inductions
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k