Half life

RyanDiemond·half-life·Assets/PCB design/starbie.kicad_pcb

Half life PCB layout, top view — open source ESP32 board by RyanDiemond

About the Half life PCB

Half life is an open source ESP32 PCB design by RyanDiemond, published on GitHub. It is a 2-layer board measuring 113 × 85.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the displays & leds designs in this gallery.

From the project

This is my schematic; I have a XIAO ESP32 C3 board, two buttons, dht11 sensor, display screen, mpu6050, and a resistor. The schematic also shows how all the wiring is connected.

This is my schematic; I have a XIAO ESP32 C3 board, two buttons, dht11 sensor, display screen, mpu6050, and a resistor. The schematic also shows how all the wiring is connected.

This is my base PCB; it is in a star shape. Within my PCB I used wires for all the power connections and I used a fill layer for the GND.

This is my personalized PCB; It has words on it that says "Made by Ryan" and it has two pictures of a cheetah running.

Half life, from the project README
From the project README

Main components on the Half life

Half life bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Half life design files

The KiCad project lives in the RyanDiemond/half-life repository on GitHub; these links point at the commit this page was built from.

Half life: common questions

What microcontroller does the Half life use?

The Half life is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Half life PCB?

The Half life measures 113 × 85.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Half life?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Half life design files?

From the RyanDiemond/half-life repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Half life design in my own project?

The repository has no license, so all rights stay with RyanDiemond. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Half life without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards