6 open source boards using the BQ27427YZFR
Real designs built with the BQ27427YZFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Soleil hardware
protolux-electronics
65 × 30 mm66 parts4LCERN-OHL-P-2.022ESP32
Watch
dezash123
42 × 42 mm179 parts6LNo license1ESP32
Airgradient-GO
Open-Air-Foundation
62.9 × 87 mm141 parts4LCC-BY-SA-4.00ESP32
Low Cost Audio Sensor
ryanstevensmith
115 × 107 mm137 parts4LCERN-OHL-P-2.00RP2040/RP2350
ControlCardRP
abinash18
53.5 × 49.5 mm179 parts4LGPL-3.00RP2040/RP2350
ControlCardRP panelized
abinash18
68.2 × 63.2 mm151 parts4LGPL-3.00
How designs wire the BQ27427YZFR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BQ27427YZFR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 5 of 5 designs, most often 2.2 µF.
- The BIN pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 200 kΩ).
- The SRX pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF).
- The BAT pin has a capacitor to GND on 4 of 5 designs, most often 1 µF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GPOUTpin A1 | Connected to: Signal 100% |
|
| SDApin A2 | Connected to: The microcontroller 40% |
|
| SCLpin A3 | Connected to: The microcontroller 40% |
|
| BINpin B1 | Connected to: Signal 100% |
|
| VSSpin B2, C1 | Connected to: GND 100% | — |
| VDDpin B3 | Connected to: Signal 80% · VDD 20% |
|
| SRXpin C2 | Connected to: Signal 60% · BATT 40% |
|
| BATpin C3 | Connected to: A connector 60% · BATT 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Soleil hardware by protolux-electronics, Watch pcb by dezash123, ControlCardRP by abinash18 and Airgradient-GO by Open-Air-Foundation.
The BQ27427YZFR in open source designs
The gallery holds 6 open source boards using the BQ27427YZFR from 5 GitHub repositories; a typical one measures about 64 × 56.4 mm and carries around 146 components.
100% use four copper layers or more, and 83% carry an open source license.
The most starred is Soleil hardware by protolux-electronics.
Microcontrollers on boards using the BQ27427YZFR
What boards using the BQ27427YZFR are built for
BQ27427YZFR: common questions
Where can I find a BQ27427YZFR reference design?
Each of the 6 boards on this page is a real design using the BQ27427YZFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ27427YZFR VDD pin connected?
The VDD pin has a capacitor to GND on 5 of 5 designs, most often 2.2 µF. Counted from the KiCad layouts of 5 open source designs using the BQ27427YZFR.
What resistor goes on the BQ27427YZFR BIN pin?
The BIN pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 200 kΩ). Counted from the KiCad layouts of 5 open source designs using the BQ27427YZFR.
How is the BQ27427YZFR SRX pin connected?
The SRX pin has a capacitor to GND on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the BQ27427YZFR.
Which microcontrollers do boards using the BQ27427YZFR use?
Most are built on ESP32 (3), RP2040/RP2350 (2) and Raspberry Pi (1).
How big is a typical board using the BQ27427YZFR?
The median is 64 × 56.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the BQ27427YZFR?
By GitHub stars, Soleil hardware by protolux-electronics, with 22 stars.
Can I simulate one of these boards using the BQ27427YZFR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.