The-Flying-Charizard

sahilchess·The-Flying-Charizard·hardware/The Flying Charizard.kicad_pcb

The-Flying-Charizard PCB layout, top view — open source STM32 board by sahilchess

About the The-Flying-Charizard PCB

The-Flying-Charizard is an open source STM32 PCB design by sahilchess, published on GitHub. It is a 2-layer board measuring 50 × 56 mm, with 79 components from 36 distinct parts.

Its main chip is the STM32F722RETX, from the STM32 family. Other key parts include the BQ25883RGER, TPS63070RNMR, LMR51430, ICM-45686 and BMP580. By type, the board carries 37 capacitors, 22 resistors, 6 ICs, 4 inductors, 3 connectors and 2 crystals.

It belongs with the power & battery, sensors and robotics & motion designs in this gallery.

From the project

A Simple STM32-based flight controller PCB with Charizard-themed artwork etched into the board layers.

A Simple STM32-based flight controller PCB with Charizard-themed artwork etched into the board layers.

The Flying Charizard is a fully custom PCB designed around the STM32F722RETx microcontroller for flight control applications. It combines practical avionics hardware with Pokémon-inspired PCB art across copper and silkscreen layers.

- STM32 microcontroller (STM32F722RETx) - USB-C power and communication - Battery charge management (RA9357RNER) - Buck-boost converter (TPS63070RNNR) for stable power delivery - Barometric pressure sensor (BMP390) - Accelerometer / gyroscope (KN-45696) for IMU…

The-Flying-Charizard, from the project README
From the project README

Main components on the The-Flying-Charizard

The-Flying-Charizard bill of materials (BOM)

79 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BQ25883RGER
TI(德州仪器)
U1
1
TPS63070RNMR
TI(德州仪器)
U2
1
LMR51430
U3
1
ICM-45686
TDK InvenSense(应美盛)
U4
1
STM32F722RETX
STM32F722RETx
U5
1
BMP580
Bosch(博世)
U6
1
X322525MOB4SI
YXC(扬兴晶振)
X1
1
Q13FC13500004
Q13FC1350000400
EPSON(爱普生)
X2
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J1
2
CONN_01X03
Conn_01x03
J2, J3
1
TF-01A
TF-01A_C2889258
Yuandi(台湾元迪)
Card1
2
TS-1088-AR02016
XUNPU(讯普)
SW1, SW2
1
TYPE-C 16PIN 2MD(073)
TYPE-C 16PIN 2MD
SHOU HAN(首韩)
USB1
1
LED
D1
1
1UH
1uH
L1
1
1.5UH
1.5uH
L2
1
5.6UH
5.6uH
L3
1
FCM1608KF-601T03
TAI-TECH(台庆)
L4
4
1UF
1uF
C1, C28, C29, C30
9
10UF
10uF
C2, C3, C5, C6, C7, C8, C9, C12 +1
Show 16 more
QtyPartRefs
1
47NF
100nF
C4
4
22UF
22uF
C10, C13, C17, C18
1
22uF
C11
10
100NF
100nF
C14, C15, C19, C20, C21, C22, C23, C25 +2
2
2.2UF
2.2uF
C16, C32
2
100nF
C24, C27
2
20PF
20pF
C33, C34
2
6.8PF
15pF
C35, C36
2
5.1K
R1, R2
1
383
R3
1
5.23K
R4
1
30.1K
R5
14
10K
R6, R8, R9, R10, R11, R12, R13, R16 +6
1
10K
R7
1
100K
R14
1
22.1K
R15

The-Flying-Charizard design files

The KiCad project lives in the sahilchess/The-Flying-Charizard repository on GitHub; these links point at the commit this page was built from.

The-Flying-Charizard: common questions

What microcontroller does the The-Flying-Charizard use?

The The-Flying-Charizard is built around the STM32F722RETX, from the STM32 family.

How big is the The-Flying-Charizard PCB?

The The-Flying-Charizard measures 50 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the The-Flying-Charizard?

79 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the The-Flying-Charizard design files?

From the sahilchess/The-Flying-Charizard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the The-Flying-Charizard design in my own project?

The repository has no license, so all rights stay with sahilchess. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the The-Flying-Charizard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards