Ejemplo con esp32 y Antena
Saigelus·Electiva-Dise-o-Mecatr-nico·Video de ejemplo/Ejemplo con esp32 y Antena/Ejemplo con esp32 y Antena.kicad_pcb
About the Ejemplo con esp32 y Antena PCB
Ejemplo con esp32 y Antena is an open source ESP32 PCB design by Saigelus, published on GitHub. It is a 2-layer board measuring 25.8 × 43.8 mm, with 31 components from 19 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117 and DHT11. By type, the board carries 10 capacitors, 9 diodes, 5 resistors, 3 ICs, 2 connectors and 2 switches.
From the project
Repositorio para asignaciones de diseño mecatrónico
Link a video de ESP32 con Antena!: https://youtu.be/J3MrhWr3mPE
Main components on the Ejemplo con esp32 y Antena
Ejemplo con esp32 y Antena bill of materials (BOM)
31 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-2 | U1 |
| 1 | AMS1117 | SOT-223-3_TabPin2 | U2 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 1 | USB_OTG | USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | RST | SW_PUSH_6mm_H5mm | SW1 |
| 1 | Boot | SW_PUSH_6mm_H5mm | SW2 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 2 | D | D_0603_1608Metric | D2, D6 |
| 3 | D_TVS | D_PowerDI-123 | D3, D4, D5 |
| 1 | LED_3 | LED_0603_1608Metric | D7 |
| 1 | LED_2 | LED_0603_1608Metric | D8 |
| 1 | LED_1 | LED_0603_1608Metric | D9 |
| 4 | 10uF | C_0402_1005Metric | C1, C3, C5, C10 |
| 1 | 1uF | C_0402_1005Metric | C2 |
| 5 | 0.1uF | C_0402_1005Metric | C4, C6, C7, C8, C9 |
| 1 | 1k | R_0402_1005Metric | R1 |
| 1 | 10k | R_0402_1005Metric | R2 |
| 3 | 220 | R_0402_1005Metric | R3, R4, R5 |
Ejemplo con esp32 y Antena design files
The KiCad project lives in the Saigelus/Electiva-Dise-o-Mecatr-nico repository on GitHub; these links point at the commit this page was built from.
Ejemplo con esp32 y Antena: common questions
What microcontroller does the Ejemplo con esp32 y Antena use?
The Ejemplo con esp32 y Antena is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Ejemplo con esp32 y Antena PCB?
The Ejemplo con esp32 y Antena measures 25.8 × 43.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ejemplo con esp32 y Antena?
31 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ejemplo con esp32 y Antena design files?
From the Saigelus/Electiva-Dise-o-Mecatr-nico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ejemplo con esp32 y Antena design in my own project?
The repository has no license, so all rights stay with Saigelus. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ejemplo con esp32 y Antena without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Electiva-Dise-o-Mecatr-nico
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k