Firedamp fd1

saikoushiknalubola·firedamp-fd1·electronics/kicad/fd1_controller.kicad_pcb

Firedamp fd1 PCB layout, top view — open source ESP32 board by saikoushiknalubola

About the Firedamp fd1 PCB

Firedamp fd1 is an open source ESP32 PCB design by saikoushiknalubola, published on GitHub. It is a 2-layer board measuring 110 × 80 mm, with 44 components from 39 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the MAX3485, DRV8871, ULN2003A, MP1584 buck module 12V>5V and AMS1117-3.3. By type, the board carries 16 connectors, 10 resistors, 7 capacitors, 6 ICs, 3 diodes and 1 transistor.

It belongs with the robotics & motion designs in this gallery.

From the project

FD-1 is a wellhead node for coal mine methane drainage boreholes. It measures gas purity (NDIR CH4 and electrochemical O2), flow (ISO 5167 orifice + differential pressure) and line pressure at each borehole, throttles or isolates a hole that is drawing in air, and logs per-borehole methane totals for MRV.

Vishwakarma Awards 2026-27 · Sustainable Mining (IIT Hyderabad) · Application ID VK26-IITH-SM-0008

Team Chakra - Saikoushik Nalubola (lead), B.Tech CSE (AI & ML), SR University, Warangal - Devara Aravind, Mining Engineering, University College of Engineering, Osmania University - Atthe Durga Raj, Mining Engineering, JNTUH University College of Engineering Manthani

Firedamp fd1, from the project README
From the project README

Main components on the Firedamp fd1

Firedamp fd1 bill of materials (BOM)

44 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8R8
U1
1
MAX3485
U2
1
DRV8871
U3
1
ULN2003A
U4
1
MP1584 buck module 12V>5V
U5
1
AMS1117-3.3
U6
1
IRLZ44N
Q1
1
USB D-/D+ (native USB)
J1
1
SDP810-500Pa dP
J2
1
SHT40 T/RH
J3
1
SEN0322 O2
J4
1
SSD1306 OLED
J5
1
MH-440D CH4 NDIR
J6
1
MPX5100AP pressure
J7
1
RS-485 to gateway
J8
1
NC solenoid 12 V
J9
1
Throttle servo
J10
1
Servo 6 V BEC in
J11
1
3-way router valve
J12
1
Stack light + buzzer
J13
Show 19 more
QtyPartRefs
1
microSD module
J14
1
12 V DC in
J15
1
EN / BOOT / GND
J16
1
2A
F1
1
1N5822
D1
1
SS34
D2
1
SMBJ15A
D3
3
100nF
C1, C2, C7
1
1uF
C3
1
470uF 25V
C4
1
10uF
C5
1
22uF
C6
2
4.7k
R1, R2
3
10k
R3, R9, R10
1
18k
R4
1
120R
R5
1
100R
R6
1
100k
R7
1
33k
R8

Firedamp fd1 design files

The KiCad project lives in the saikoushiknalubola/firedamp-fd1 repository on GitHub; these links point at the commit this page was built from.

Firedamp fd1: common questions

What microcontroller does the Firedamp fd1 use?

The Firedamp fd1 is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.

How big is the Firedamp fd1 PCB?

The Firedamp fd1 measures 110 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Firedamp fd1?

44 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Firedamp fd1 design files?

From the saikoushiknalubola/firedamp-fd1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Firedamp fd1 design in my own project?

The repository has no license, so all rights stay with saikoushiknalubola. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Firedamp fd1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards