HardLabs

Arduino eeprom programmer

saktheeswaranswan·8-bit-computer-pcb-version-simple·eeprom_programmer/arduino_eeprom_programmer/arduino_eeprom_programmer.kicad_pcb

Arduino eeprom programmer PCB layout, top view — open source AVR/Arduino board by saktheeswaranswan

About the Arduino eeprom programmer PCB

Arduino eeprom programmer is an open source AVR/Arduino PCB design by saktheeswaranswan, published on GitHub under the MIT license. It is a 2-layer board measuring 68.7 × 53.5 mm, with 8 components from 6 distinct parts.

Its main chip is the Arduino_Uno_Shield, from the AVR/Arduino family. Other key parts include the 74HC595 and 28C64. By type, the board carries 3 ICs, 2 diodes and 2 resistors.

It belongs with the displays & leds and usb & debug tools designs in this gallery.

From the project

Schematics and code for my home-made 8-bit CPU and its companion boards.

Schematics and code for my home-made 8-bit CPU and its companion boards.

During the past month, I designed and built a programmable 8-bit CPU from scratch, out of basic series 74LS logic ICs.

This repository contains pictures, schematics, and code for this project and its companion boards.

The MK1 CPU is composed of several modules, all connected trough a common 8-bit BUS, the status of each module is shown by dedicated LEDs.

Arduino eeprom programmer, from the project README
From the project README

Main components on the Arduino eeprom programmer

74HC59528C64

Arduino eeprom programmer bill of materials (BOM)

8 components, 6 distinct parts.

QtyPartRefs
2
74HC595
U1, U2
1
28C64
U3
1
Arduino_Uno_Shield
XA1
1
READ
D1
1
WRITE
D2
2
220
R1, R2

Arduino eeprom programmer design files

The KiCad project lives in the saktheeswaranswan/8-bit-computer-pcb-version-simple repository on GitHub; these links point at the commit this page was built from.

Arduino eeprom programmer: common questions

What microcontroller does the Arduino eeprom programmer use?

The Arduino eeprom programmer is built around the Arduino_Uno_Shield, from the AVR/Arduino family.

How big is the Arduino eeprom programmer PCB?

The Arduino eeprom programmer measures 68.7 × 53.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino eeprom programmer?

8 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino eeprom programmer design files?

From the saktheeswaranswan/8-bit-computer-pcb-version-simple repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Arduino eeprom programmer design in my own project?

Yes, under the terms of its MIT license, which saktheeswaranswan chose for the repository.

Can I test firmware for the Arduino eeprom programmer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in 8-bit-computer-pcb-version-simple

Similar boards