HardLabs

5gModem

SaltyMelonYT·PCB-Projects·5gModem/Hardware/5gModem.kicad_pcb

5gModem PCB layout, top view — open source Raspberry Pi board by SaltyMelonYT

About the 5gModem PCB

5gModem is an open source Raspberry Pi PCB design by SaltyMelonYT, published on GitHub under the MIT license. It is a 2-layer board measuring 69.4 × 57.2 mm, with 6 components from 5 distinct parts.

Its main chip is the ComputeModule5-CM5, from the Raspberry Pi family. By type, the board carries 2 connectors, 2 resistors and 1 diode.

From the project

I'm a nerd

5gModem bill of materials (BOM)

6 components, 5 distinct parts.

QtyPartRefs
1
USB_C_Receptacle_PowerOnly_6P
J1
1
USB_C_Receptacle_USB2.0_14P
J2
1
ComputeModule5-CM5
Module1
1
D
D1
2
10k
R3, R4

5gModem design files

The KiCad project lives in the SaltyMelonYT/PCB-Projects repository on GitHub; these links point at the commit this page was built from.

5gModem: common questions

What microcontroller does the 5gModem use?

The 5gModem is built around the ComputeModule5-CM5, from the Raspberry Pi family.

How big is the 5gModem PCB?

The 5gModem measures 69.4 × 57.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 5gModem?

6 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the 5gModem design files?

From the SaltyMelonYT/PCB-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 5gModem design in my own project?

Yes, under the terms of its MIT license, which SaltyMelonYT chose for the repository.

Can I test firmware for the 5gModem without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in PCB-Projects

Similar boards