HardLabs

Lightboard-Gift-REMASTERED

SaltyMelonYT·PCB-Projects·Lightboard-Gift-V2/Hardware/Lightboard-Gift-REMASTERED.kicad_pcb

Lightboard-Gift-REMASTERED PCB layout, top view — open source RP2040/RP2350 board by SaltyMelonYT

About the Lightboard-Gift-REMASTERED PCB

Lightboard-Gift-REMASTERED is an open source RP2040/RP2350 PCB design by SaltyMelonYT, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 26 components from 7 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 12 resistors, 10 diodes, 2 switches, 1 module and 1 connector.

From the project

I'm a nerd

Main components on the Lightboard-Gift-REMASTERED

RaspberryPi_Pico

Lightboard-Gift-REMASTERED bill of materials (BOM)

26 components, 7 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
USB_C_Receptacle_PowerOnly_6P
J1
1
SW_Push
SW1
1
SW_SPST
SW2
10
LED_RKGB
D1, D2, D3, D4, D5, D6, D7, D8 +2
2
5k1
R1, R2
10
R_Small
R3, R4, R5, R6, R7, R8, R9, R10 +2

Lightboard-Gift-REMASTERED design files

The KiCad project lives in the SaltyMelonYT/PCB-Projects repository on GitHub; these links point at the commit this page was built from.

Lightboard-Gift-REMASTERED: common questions

What microcontroller does the Lightboard-Gift-REMASTERED use?

The Lightboard-Gift-REMASTERED is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Lightboard-Gift-REMASTERED PCB?

The Lightboard-Gift-REMASTERED measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lightboard-Gift-REMASTERED?

26 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lightboard-Gift-REMASTERED design files?

From the SaltyMelonYT/PCB-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Lightboard-Gift-REMASTERED design in my own project?

Yes, under the terms of its MIT license, which SaltyMelonYT chose for the repository.

Can I test firmware for the Lightboard-Gift-REMASTERED without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PCB-Projects

Similar boards