LampNode
SaltyMelonYT·PCB-Projects·LampNode/Hardware/LampNode.kicad_pcb
About the LampNode PCB
LampNode is an open source Raspberry Pi PCB design by SaltyMelonYT, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 74 mm, with 18 components from 7 distinct parts.
Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the TTP223-BG. By type, the board carries 12 diodes, 2 connectors, 2 capacitors, 1 IC and 1 module.
From the project
I'm a nerd
Main components on the LampNode
LampNode bill of materials (BOM)
18 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TTP223-BG | SOT-23-6_Handsoldering | U1 |
| 1 | RaspberryPi_Pico_W | RaspberryPi_Pico_W_SMD_HandSolder | A1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x03 | JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_Vertical | J2 |
| 12 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 1 | C_Small | C_2220_5750Metric | C3 |
| 1 | 25pF | C_1812_4532Metric | C4 |
LampNode design files
The KiCad project lives in the SaltyMelonYT/PCB-Projects repository on GitHub; these links point at the commit this page was built from.
LampNode: common questions
What microcontroller does the LampNode use?
The LampNode is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.
How big is the LampNode PCB?
The LampNode measures 80 × 74 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LampNode?
18 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the LampNode design files?
From the SaltyMelonYT/PCB-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LampNode design in my own project?
Yes, under the terms of its MIT license, which SaltyMelonYT chose for the repository.
Can I test firmware for the LampNode without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in PCB-Projects
RP2040/RP2350
Hardware
SaltyMelonYT
370 × 155 mm157 parts4LMIT0Raspberry Pi
CM5IO
SaltyMelonYT
167 × 102.2 mm47 parts2LMIT0RP2040/RP2350
Lightboard-Gift-REMASTERED
SaltyMelonYT
100 × 100 mm26 parts2LMIT0RP2040/RP2350
Attempt
SaltyMelonYT
50.9 × 36.8 mm23 parts2LMIT0RP2040/RP2350
LightBoard-Gift
SaltyMelonYT
76.5 × 52.8 mm23 parts2LMIT0Eeprom
SaltyMelonYT
32.6 × 30.5 mm8 parts2LMIT0Raspberry Pi
5gModem
SaltyMelonYT
69.4 × 57.2 mm6 parts2LMIT0Raspberry Pi
GOPHER
SaltyMelonYT
62 × 49.2 mm4 parts2LMIT0
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license672Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507