HardLabs

Attempt

SaltyMelonYT·PCB-Projects·FirstC-Routed/Attempt/Attempt.kicad_pcb

Attempt PCB layout, top view — open source RP2040/RP2350 board by SaltyMelonYT

About the Attempt PCB

Attempt is an open source RP2040/RP2350 PCB design by SaltyMelonYT, published on GitHub under the MIT license. It is a 2-layer board measuring 50.9 × 36.8 mm, with 23 components from 13 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223 and W25Q16JVSS. By type, the board carries 12 capacitors, 5 resistors, 3 ICs, 1 crystal, 1 connector and 1 switch.

From the project

I'm a nerd

Main components on the Attempt

RP2040NCP1117-3.3_SOT223W25Q16JVSS

Attempt bill of materials (BOM)

23 components, 13 distinct parts.

QtyPartRefs
1
RP2040
U1
1
NCP1117-3.3_SOT223
U2
1
W25Q16JVSS
U3
1
ABMB-272-T3
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
1
SW_Push
SW1
2
10u
C1, C9
7
100n
C2, C3, C4, C5, C6, C7, C10
1
2u2
C8
2
15p
C11, C12
2
27.4
R1, R2
2
1k
R3, R5
1
DNF
R4

Attempt design files

The KiCad project lives in the SaltyMelonYT/PCB-Projects repository on GitHub; these links point at the commit this page was built from.

Attempt: common questions

What microcontroller does the Attempt use?

The Attempt is built around the RP2040, from the RP2040/RP2350 family.

How big is the Attempt PCB?

The Attempt measures 50.9 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Attempt?

23 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Attempt design files?

From the SaltyMelonYT/PCB-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Attempt design in my own project?

Yes, under the terms of its MIT license, which SaltyMelonYT chose for the repository.

Can I test firmware for the Attempt without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PCB-Projects

Similar boards