XD-keyboard
samdoes-stuff·xD-keyboard·mykeyboard/mykeyboard.kicad_pcb
About the XD-keyboard PCB
XD-keyboard is an open source Nordic nRF PCB design by samdoes-stuff, published on GitHub. It is a 2-layer board measuring 269.7 × 107.9 mm, with 172 components from 92 distinct parts.
Its main chip is the nRF52840, from the Nordic nRF family. Other key parts include the BQ21040DBVR and ESDR0502NMUTAG. By type, the board carries 64 diodes, 61 relays, 24 capacitors, 11 resistors, 4 inductors and 3 ICs.
It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.
From the project
It is a dual functionality keyboard which supports wireless(Bluetooth) & wired connection without any switch. This keyboard is powered by ZMK firmware with a onboard battery with Ultra low power optimization.
It is a dual functionality keyboard which supports wireless(Bluetooth) & wired connection without any switch. This keyboard is powered by ZMK firmware with a onboard battery with Ultra low power optimization.
Adafruit github repo for nrf52 has been used to make the firmware for Our on board MCU.
It is a PCB keyboard which has a 4 layer or 6 layer and was designed by both Kicad(Schematics) & Easyeda Pro(Routing). JLCPCB is used for PCB fabrication.
Main components on the XD-keyboard
XD-keyboard bill of materials (BOM)
172 components, 92 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ21040DBVR | SOT95P280X145-6N | U1 |
| 1 | nRF52840 | Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U2 |
| 1 | ESDR0502NMUTAG | UDFN-6_1.2x1.0mm_P0.4mm | U3 |
| 1 | 32.768 kHz | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | ~~,` | Gateron-KS33-Hotswap-1U | K0 |
| 1 | !,1 | Gateron-KS33-Hotswap-1U | K1 |
| 1 | @,2 | Gateron-KS33-Hotswap-1U | K2 |
| 1 | #,3 | Gateron-KS33-Hotswap-1U | K3 |
| 1 | $,4 | Gateron-KS33-Hotswap-1U | K4 |
| 1 | %,5 | Gateron-KS33-Hotswap-1U | K5 |
| 1 | ^,6 | Gateron-KS33-Hotswap-1U | K6 |
| 1 | &,7 | Gateron-KS33-Hotswap-1U | K7 |
| 1 | *,8 | Gateron-KS33-Hotswap-1U | K8 |
| 1 | (,9 | Gateron-KS33-Hotswap-1U | K9 |
| 1 | ),0 | Gateron-KS33-Hotswap-1U | K10 |
| 1 | _,- | Gateron-KS33-Hotswap-1U | K11 |
| 1 | +,= | Gateron-KS33-Hotswap-1U | K12 |
| 1 | Backspace | Gateron-KS33-Hotswap-2U | K13 |
Show 72 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Tab | Gateron-KS33-Hotswap-1.5U | K14 |
| 1 | Q | Gateron-KS33-Hotswap-1U | K15 |
| 1 | W | Gateron-KS33-Hotswap-1U | K16 |
| 1 | E | Gateron-KS33-Hotswap-1U | K17 |
| 1 | R | Gateron-KS33-Hotswap-1U | K18 |
| 1 | T | Gateron-KS33-Hotswap-1U | K19 |
| 1 | Y | Gateron-KS33-Hotswap-1U | K20 |
| 1 | U | Gateron-KS33-Hotswap-1U | K21 |
| 1 | I | Gateron-KS33-Hotswap-1U | K22 |
| 1 | O | Gateron-KS33-Hotswap-1U | K23 |
| 1 | P | Gateron-KS33-Hotswap-1U | K24 |
| 1 | {,[ | Gateron-KS33-Hotswap-1U | K25 |
| 1 | },] | Gateron-KS33-Hotswap-1U | K26 |
| 1 | |,\ | Gateron-KS33-Hotswap-1.5U | K27 |
| 1 | Caps Lock | Gateron-KS33-Hotswap-1.75U | K28 |
| 1 | A | Gateron-KS33-Hotswap-1U | K29 |
| 1 | S | Gateron-KS33-Hotswap-1U | K30 |
| 1 | D | Gateron-KS33-Hotswap-1U | K31 |
| 1 | F | Gateron-KS33-Hotswap-1U | K32 |
| 1 | G | Gateron-KS33-Hotswap-1U | K33 |
| 1 | H | Gateron-KS33-Hotswap-1U | K34 |
| 1 | J | Gateron-KS33-Hotswap-1U | K35 |
| 1 | K | Gateron-KS33-Hotswap-1U | K36 |
| 1 | L | Gateron-KS33-Hotswap-1U | K37 |
| 1 | :,; | Gateron-KS33-Hotswap-1U | K38 |
| 1 | ",' | Gateron-KS33-Hotswap-1U | K39 |
| 1 | Enter | Gateron-KS33-Hotswap-2.25U | K40 |
| 1 | Shift | Gateron-KS33-Hotswap-2.25U | K41 |
| 1 | Z | Gateron-KS33-Hotswap-1U | K42 |
| 1 | X | Gateron-KS33-Hotswap-1U | K43 |
| 1 | C | Gateron-KS33-Hotswap-1U | K44 |
| 1 | V | Gateron-KS33-Hotswap-1U | K45 |
| 1 | B | Gateron-KS33-Hotswap-1U | K46 |
| 1 | N | Gateron-KS33-Hotswap-1U | K47 |
| 1 | M | Gateron-KS33-Hotswap-1U | K48 |
| 1 | <,, | Gateron-KS33-Hotswap-1U | K49 |
| 1 | >,. | Gateron-KS33-Hotswap-1U | K50 |
| 1 | ?,/ | Gateron-KS33-Hotswap-1U | K51 |
| 1 | Shift | Gateron-KS33-Hotswap-2.75U | K52 |
| 2 | Ctrl | Gateron-KS33-Hotswap-1.25U | K53, K60 |
| 2 | Win | Gateron-KS33-Hotswap-1.25U | K54, K58 |
| 2 | Alt | Gateron-KS33-Hotswap-1.25U | K55, K57 |
| 1 | Blank | Gateron-KS33-Hotswap-6.25U | K56 |
| 1 | Menu | Gateron-KS33-Hotswap-1.25U | K59 |
| 1 | NetTie_2 | net-tie-2-tiny | NT1 |
| 1 | Reset | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 61 | D | D_SOD-523 | D0, D1, D2, D3, D4, D5, D6, D7 +53 |
| 1 | B5819W SL | D_SOD-323 | D61 |
| 1 | CHG | LED_0603_1608Metric | D62 |
| 1 | BLUE | LED_0603_1608Metric | D63 |
| 1 | 15nH | L_0402_1005Metric | L1 |
| 2 | 10uH | L_0603_1608Metric | L2, L3 |
| 1 | 3.9nH | L_0402_1005Metric | L4 |
| 4 | 4.7uF | C_0402_1005Metric | C1, C4, C13, C19 |
| 4 | 1uF | C_0402_1005Metric | C2, C14, C15, C20 |
| 1 | 47nF | C_0402_1005Metric | C3 |
| 1 | 1nF | C_0402_1005Metric | C5 |
| 1 | 100pF | C_0402_1005Metric | C6 |
| 4 | 100nF | C_0402_1005Metric | C7, C16, C17, C18 |
| 4 | 15pF | C_0402_1005Metric | C8, C9, C21, C22 |
| 1 | 1.5pF | C_0402_1005Metric | C10 |
| 2 | 1pF | C_0402_1005Metric | C11, C12 |
| 1 | 10nF | C_0402_1005Metric | C23 |
| 1 | 1000pF/NC | C_0402_1005Metric | C24 |
| 1 | 0R | R_0402_1005Metric | R1 |
| 2 | 10k | R_0402_1005Metric | R2, R4 |
| 1 | 2.7k | R_0603_1608Metric | R3 |
| 1 | 1.5k | R_0402_1005Metric | R5 |
| 2 | 5.1k | R_0402_1005Metric | R6, R7 |
| 2 | 2M | R_0603_1608Metric | R8, R9 |
| 1 | 10M | R_0402_1005Metric | R10 |
| 1 | 1M | R_0402_1005Metric | R11 |
XD-keyboard design files
The KiCad project lives in the samdoes-stuff/xD-keyboard repository on GitHub; these links point at the commit this page was built from.
- Layoutmykeyboard/mykeyboard.kicad_pcb
- Schematicmykeyboard/mykeyboard.kicad_sch
- BOMBOM.csv
XD-keyboard: common questions
What microcontroller does the XD-keyboard use?
The XD-keyboard is built around the nRF52840, from the Nordic nRF family.
How big is the XD-keyboard PCB?
The XD-keyboard measures 269.7 × 107.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XD-keyboard?
172 components, from 92 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the XD-keyboard design files?
From the samdoes-stuff/xD-keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the XD-keyboard design in my own project?
The repository has no license, so all rights stay with samdoes-stuff. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the XD-keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381