7 open source boards using the ESDR0502NMUTAG
Real designs built with the ESDR0502NMUTAG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Mikoto
zhiayang
18 × 33.3 mm53 parts4LApache-2.0358Nordic nRF
Byrandev
byrantech
35.9 × 41.8 mm55 parts2LMIT21Comp75
benzooku
304.9 × 120.7 mm373 parts2LGPL-3.01Nordic nRF
XD-keyboard
samdoes-stuff
269.7 × 107.9 mm172 parts2LNo license1Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kPipar chip
RasmusKoit
68 × 61.3 mm69 parts4LNo license56Nordic nRF
Mikoto
yangxing844
18 × 33.3 mm55 parts4LNo license1
How designs wire the ESDR0502NMUTAG
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ESDR0502NMUTAG connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| NCpin 2, 3 | Connected to: Not connected 100% | — |
| VBUSpin 6 | Connected to: VBUS 71% · a signal 29% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Keyboard by byrantech, Mikoto by zhiayang, Pipar chip by RasmusKoit and Byrandev by byrantech.
The ESDR0502NMUTAG in open source designs
The gallery holds 7 open source boards using the ESDR0502NMUTAG from 7 GitHub repositories; a typical one measures about 68 × 61.3 mm and carries around 69 components.
57% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is Keyboard by byrantech.
Parts used alongside the ESDR0502NMUTAG
Microcontrollers on boards using the ESDR0502NMUTAG
What boards using the ESDR0502NMUTAG are built for
ESDR0502NMUTAG: common questions
Where can I find a ESDR0502NMUTAG reference design?
Each of the 7 boards on this page is a real design using the ESDR0502NMUTAG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESDR0502NMUTAG?
The mikoto-pins, nRF52840, BQ21040DBVR, C15464 and C1851953 appear in the most repositories here.
Which microcontrollers do boards using the ESDR0502NMUTAG use?
Most are built on Nordic nRF (5).
How big is a typical board using the ESDR0502NMUTAG?
The median is 68 × 61.3 mm, and 57% are two-layer designs.
What is the most popular open source board using the ESDR0502NMUTAG?
By GitHub stars, Keyboard by byrantech, with 4,264 stars.
Can I simulate one of these boards using the ESDR0502NMUTAG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.