Board b sensor
sashankthapa·fingertip-fusion-hw·hardware/board-b-sensor/board-b-sensor.kicad_pcb
About the Board b sensor
Board b sensor is an open source PCB design by sashankthapa, published on GitHub. It is a 2-layer board measuring 18 × 14 mm, with 5 components from 5 distinct parts.
Other key parts include the ICM-42688-P. By type, the board carries 3 capacitors, 1 IC and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
This project implements a two-board hardware architecture for acquiring data from an IMU. The system consists of:
This project implements a two-board hardware architecture for acquiring data from an IMU. The system consists of:
- Board A: Main controller (STM32F446R) board responsible for USB communication, power regulation, timestamping, and interfacing with the host PC. - Board B: ICM-42688-P sensor board carrying an SPI IMU. The architecture separates the processing electronics from the sensing electronics, allowing the sensor to be placed on a fingertip. dimensions are (18mm x 14mm)
Main components on the Board b sensor
Board b sensor bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICM-42688-P | PQFN50P300X250X97-14N | U1 |
| 1 | Conn_01x08 | JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical | J1 |
| 1 | 2.2uf | C_01005_0402Metric | C1 |
| 1 | 100nf | C_01005_0402Metric | C2 |
| 1 | 10nf | C_01005_0402Metric | C3 |
Board b sensor design files
The KiCad project lives in the sashankthapa/fingertip-fusion-hw repository on GitHub; these links point at the commit this page was built from.
Board b sensor: common questions
How big is the Board b sensor?
The Board b sensor measures 18 × 14 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Board b sensor?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Board b sensor design files?
From the sashankthapa/fingertip-fusion-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Board b sensor design in my own project?
The repository has no license, so all rights stay with sashankthapa. Use it as a reference, and ask the author before reusing the design.
More boards in fingertip-fusion-hw
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956