ESP32-Devboard

sauravraj67·ESP32-Devboard·ESP32 Devboard/PCB/DevBoard.kicad_pcb

ESP32-Devboard PCB layout, top view — open source ESP32 board by sauravraj67

About the ESP32-Devboard PCB

ESP32-Devboard is an open source ESP32 PCB design by sauravraj67, published on GitHub. It is a 2-layer board measuring 29 × 51.9 mm, with 19 components from 12 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LD1117S33TR_SOT223. By type, the board carries 5 capacitors, 5 resistors, 3 connectors, 2 ICs, 2 switches and 2 diodes.

It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

From the project

- ## Bill of Materials (BOM) - | Qty | Description | Total (USD) | |----|-------------|-------------| | 1 | PCB and Assembly | 71.97 | | 1 |Shipping JLCPCB - Discount | 1.72 |

ESP32-Devboard, from the project README
From the project README

Main components on the ESP32-Devboard

ESP32-Devboard bill of materials (BOM)

19 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U2
1
LD1117S33TR_SOT223
U3
1
TYPE-C-31-M-12
J1
2
CONN_01X20_PIN
Conn_01x20_Pin
J2, J3
2
TS-1088-AR02016
SW1, SW2
1
RED
D1
1
GREEN
D2
1
10U
10u
C1
1
22U
22u
C2
2
100N
100n
C3, C4
1
1u
C5
5
5.1K
R1, R2, R3, R4, R5

ESP32-Devboard design files

The KiCad project lives in the sauravraj67/ESP32-Devboard repository on GitHub; these links point at the commit this page was built from.

ESP32-Devboard: common questions

What microcontroller does the ESP32-Devboard use?

The ESP32-Devboard is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the ESP32-Devboard PCB?

The ESP32-Devboard measures 29 × 51.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-Devboard?

19 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-Devboard design files?

From the sauravraj67/ESP32-Devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-Devboard design in my own project?

The repository has no license, so all rights stay with sauravraj67. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-Devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards