28 open source boards using the SGM6029CYG/TR

Real designs built with the SGM6029CYG/TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

28 boardsClear filters|Most starred

How designs wire the SGM6029CYG/TR

Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the SGM6029CYG/TR connects to, and the resistors, capacitors and other passives placed on it.

  • The VOS pin has a inductor on 26 of 26 designs, most often 470 nH.
  • The VOS pin has a decoupling capacitor on 26 of 26 designs, most often 4.7 µF (then 100 nF).
  • The VIN pin has a decoupling capacitor on 26 of 26 designs, most often 2.2 µF (then 4.7 µF).
  • The EN pin is tied to VIN on 26 of 26 designs.
GNDpin A1Connected to: GND 100%
VOSpin A2Connected to: 3.3V 100%
  • Inductor on 100% · 470 nH (26)
  • Decoupling capacitor on 100% · 4.7 µF (46), 100 nF (28), 10 nF (24)
VINpin B1Connected to: VIN 100%
  • Decoupling capacitor on 100% · 2.2 µF (23), 4.7 µF (23), 100 nF (23)
SWpin B2Connected to: GND 65% · a signal 35%
  • Inductor on 35% · 470 nH (9)
MODEpin C1Connected to: GND 65% · a signal 35%
  • Resistor to GND on 35% · 249 kΩ (9)
ENpin C2Connected to: VIN 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S3 by Josephrp, XIAO ESP32 C6 by hb9ezs, ESP32S3 by dhirptl and ESP32S3 by Videocraft10.

The SGM6029CYG/TR in open source designs

The gallery holds 28 open source boards using the SGM6029CYG/TR from 26 GitHub repositories; a typical one measures about 17.8 × 21.1 mm and carries around 71 components.

64% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is ESP32S3 by Josephrp.

Microcontrollers on boards using the SGM6029CYG/TR

SGM6029CYG/TR: common questions

Where can I find a SGM6029CYG/TR reference design?

Each of the 28 boards on this page is a real design using the SGM6029CYG/TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SGM6029CYG/TR VOS pin connected?

The VOS pin has a inductor on 26 of 26 designs, most often 470 nH. Counted from the KiCad layouts of 26 open source designs using the SGM6029CYG/TR.

What decoupling capacitors do designs use on the SGM6029CYG/TR VIN pin?

The VIN pin has a decoupling capacitor on 26 of 26 designs, most often 2.2 µF (then 4.7 µF). Counted from the KiCad layouts of 26 open source designs using the SGM6029CYG/TR.

How is the SGM6029CYG/TR EN pin connected?

The EN pin is tied to VIN on 26 of 26 designs. Counted from the KiCad layouts of 26 open source designs using the SGM6029CYG/TR.

What parts are used alongside the SGM6029CYG/TR?

The SGM40567-4.2XG/TR, GD25Q64ENIGR, ESP32-S3R8, XIAO-HALF-HOLE-23P and MCU-ESP32-S3 appear in the most repositories here.

Which microcontrollers do boards using the SGM6029CYG/TR use?

Most are built on ESP32 (27) and Renesas (1).

How big is a typical board using the SGM6029CYG/TR?

The median is 17.8 × 21.1 mm, and 64% are two-layer designs.

What is the most popular open source board using the SGM6029CYG/TR?

By GitHub stars, ESP32S3 by Josephrp, with 12 stars.

Can I simulate one of these boards using the SGM6029CYG/TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part