21 open source boards using the GD25Q64ENIGR
Real designs built with the GD25Q64ENIGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32S3
RRST-NHK-Project
17.8 × 21.1 mm71 parts2LNo license0ESP32
XIAO ESP32S3 V1.3
yuxiangcheng2002
17.8 × 21.1 mm71 parts2LNo license0ESP32
XIAO ESP32S3 V1.5
ppisljar
17.8 × 21.1 mm70 parts4LNo license0ESP32
Vibe parts
luckiday
17.8 × 21.1 mm70 parts4LNo license0ESP32
XIAO ESP32S3 V1.5
ArticunoFruna
17.8 × 21.1 mm70 parts4LNo license0ESP32
ESP32S3
dhirptl
17.8 × 21.1 mm71 parts2LMIT3ESP32
ESP32S3
Videocraft10
17.8 × 21.1 mm71 parts2LMIT2ESP32
ESP32S3
feastorg
17.8 × 21.1 mm71 parts2LCC0-1.01ESP32
ESP32S3
sinismylastname
17.8 × 21.1 mm71 parts2LNo license1ESP32
ESP32S3
newtontriumphant
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
BlueJayRacing
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
DwayneCrous
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
joshujo
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
AM1NOM
17.8 × 21.1 mm71 parts2LMIT0ESP32
ESP32S3
Protract-123
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
realBoltDev
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
samanbeer
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
tomonoriyamazaki
17.8 × 21.1 mm71 parts2LNo license0ESP32
ESP32S3
jadenvv
17.8 × 21.1 mm71 parts2LNo license1ESP32
ESP32S3
sbunger
17.8 × 21.1 mm71 parts2LGPL-3.00ESP32
ESP32S3
Josephrp
17.8 × 21.1 mm71 parts2LCustom license12
How designs wire the GD25Q64ENIGR
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the GD25Q64ENIGR connects to, and the resistors, capacitors and other passives placed on it.
- Pin BP1 is left unconnected on 21 of 21 designs.
- Pin BP2 is left unconnected on 21 of 21 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: VDD_SPI 100% | — |
| Pin BP1 | Connected to: Not connected 100% | — |
| Pin BP2 | Connected to: Not connected 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S3 by Josephrp, ESP32S3 by dhirptl, ESP32S3 by Videocraft10 and ESP32S3 by feastorg.
The GD25Q64ENIGR in open source designs
The gallery holds 21 open source boards using the GD25Q64ENIGR from 21 GitHub repositories; a typical one measures about 17.8 × 21.1 mm and carries around 71 components.
86% are two-layer designs, the rest use four layers or more, and 24% carry an open source license.
The most starred is ESP32S3 by Josephrp.
Parts used alongside the GD25Q64ENIGR
Microcontrollers on boards using the GD25Q64ENIGR
What boards using the GD25Q64ENIGR are built for
GD25Q64ENIGR: common questions
Where can I find a GD25Q64ENIGR reference design?
Each of the 21 boards on this page is a real design using the GD25Q64ENIGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the GD25Q64ENIGR pin BP1 connected?
Pin BP1 is left unconnected on 21 of 21 designs. Counted from the KiCad layouts of 21 open source designs using the GD25Q64ENIGR.
How is the GD25Q64ENIGR pin BP2 connected?
Pin BP2 is left unconnected on 21 of 21 designs. Counted from the KiCad layouts of 21 open source designs using the GD25Q64ENIGR.
What parts are used alongside the GD25Q64ENIGR?
The SGM40567-4.2XG/TR, SGM6029CYG/TR, ESP32-S3R8 and XIAO-Add-On appear in the most repositories here.
Which microcontrollers do boards using the GD25Q64ENIGR use?
Most are built on ESP32 (21).
How big is a typical board using the GD25Q64ENIGR?
The median is 17.8 × 21.1 mm, and 86% are two-layer designs.
What is the most popular open source board using the GD25Q64ENIGR?
By GitHub stars, ESP32S3 by Josephrp, with 12 stars.
Can I simulate one of these boards using the GD25Q64ENIGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.