Dxxk mouse
segfau-yama·dxxk_mouse·dick_mouse_circuit/dick_mouse.kicad_pcb
About the Dxxk mouse PCB
Dxxk mouse is an open source ESP32 PCB design by segfau-yama, published on GitHub under the MIT license. It is a 2-layer board measuring 78 × 58 mm, with 47 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, AMS1117-3.3 and PCM5102A. By type, the board carries 17 capacitors, 13 connectors, 6 resistors, 4 ICs, 4 switches and 3 diodes.
It belongs with the audio designs in this gallery.
From the project
ESP32-S3 上で動作する Rust 製 USB 入力デバイスの実験用リポジトリです。
ESP32-S3 上で動作する Rust 製 USB 入力デバイスの実験用リポジトリです。
ファームウェアは、USB HID のキーボードとマウス、USB Audio Class 1(UAC1)のマイクとスピーカーを一つの USB デバイスとして提供します。
各構造体は setter や &mut self を持たず、update(self) -> Self または new() で新しい状態を返します。
USB HID と USB Audio は、同じ列で入力、処理、出力を示します。
GPIO21 のスライドスイッチに応じて、hidtask` が通常モードとゲームモードを切り替えます。
ゲームモードでは joystick の X/Y 差分が 512 を超えた方向をキー入力へ変換します。
同時押しが HID keyboard の上限を超えた場合は、実装上の割り当て順で先頭の 6 キーを送信します。
Main components on the Dxxk mouse
Dxxk mouse bill of materials (BOM)
47 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | AMS1117-3.3 Advanced Monolithic Systems | SOT-223-3_TabPin2 | U3 |
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | TYPE-C-31-M-12 Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | PJ-313D AudioJack3 SHOU HAN | C668608_PJ-313D | J2 |
| 4 | PZ254V-11-05P Conn_01x05 XFCN | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3, J4, J8, J9 |
| 1 | PZ254V-11-03P Conn_01x03 XFCN | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 3 | PZ254V-11-02P Conn_01x02 XFCN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6, J7, J12 |
| 3 | PZ254V-11-04P Conn_01x04 XFCN | PinHeader_1x04_P2.54mm_Vertical | J10, J11, J13 |
| 2 | TS-1187A-B-A-B XKB Connection | SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 2 | Tactile Switch 6x6x6mm THT Generic | SW_PUSH_6mm | SW3, SW4 |
| 2 | SS34 MDD(Microdiode Semiconductor) | D_SMA | D1, D3 |
| 1 | KT-0603R Red LED Hubei KENTO Elec | LED_0603_1608Metric | D2 |
| 6 | CL05B104KO5NNNC 0.1u Samsung Electro-Mechanics | C_0402_1005Metric | C1, C3, C9, C10, C11, C16 |
| 2 | CL21A226MAQNNNE 22u Samsung Electro-Mechanics | C_0805_2012Metric | C2, C5 |
| 5 | CL10A106MA8NRNC 10u Samsung Electro-Mechanics | C_0603_1608Metric | C4, C13, C14, C15, C17 |
| 2 | CL05A225MQ5NSNC 2.2u Samsung Electro-Mechanics | C_0402_1005Metric | C6, C12 |
| 2 | 0402B222K500NT 2.2n FH | C_0402_1005Metric | C7, C8 |
| 1 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0402WGF5101TCE 5.1k UNI-ROYAL | R_0402_1005Metric | R2, R3 |
| 3 | 0402WGF4700TCE 470 UNI-ROYAL | R_0402_1005Metric | R4, R5, R6 |
Dxxk mouse design files
The KiCad project lives in the segfau-yama/dxxk_mouse repository on GitHub; these links point at the commit this page was built from.
Dxxk mouse: common questions
What microcontroller does the Dxxk mouse use?
The Dxxk mouse is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Dxxk mouse PCB?
The Dxxk mouse measures 78 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dxxk mouse?
47 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dxxk mouse design files?
From the segfau-yama/dxxk_mouse repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dxxk mouse design in my own project?
Yes, under the terms of its MIT license, which segfau-yama chose for the repository.
Can I test firmware for the Dxxk mouse without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k