HardLabs

FRReceiverLVH

shaise·OpenSky328·Hardware/FRReceiverLVH/FRReceiverLVH.kicad_pcb

FRReceiverLVH PCB layout, top view — open source AVR/Arduino board by shaise

About the FRReceiverLVH PCB

FRReceiverLVH is an open source AVR/Arduino PCB design by shaise, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 27.5 × 14.5 mm, with 33 components from 26 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the MCP1700, CC2500_MOD6 and MX1508. By type, the board carries 8 capacitors, 7 resistors, 6 test points, 4 ICs, 3 connectors and 2 diodes.

It belongs with the usb & debug tools designs in this gallery.

From the project

An atmel implementation of OpenSky FrSky-compatible RX

Order the PCB by sending the gerbrt files to a manufacturer of your choice. I recommend JLCPCB. FR-8 gerber files and FR-8 pins gerber files FR-Tiny FR-LVH FR-Pgm Order all parts as listed in the BOM file. You will need a 0603 kit of resistors and capacitors, and for all other parts you will find a link in the BOM. FR-8 BOM FR-Tiny BOM FR-LVH BOM FR-Pgm BOM Solder all parts. You can use the interactive BOM to assist you. FR-8 Interactive BOM FR-Tiny Interactive BOM FR-LVH Interactive BOM * FR-Pgm Interactive BOM

FRReceiverLVH, from the project README
From the project README

Main components on the FRReceiverLVH

MCP1700ATmega328P-AUCC2500_MOD6MX1508

FRReceiverLVH bill of materials (BOM)

33 components, 26 distinct parts.

QtyPartRefs
1
MCP1700
U1
1
ATmega328P-AU
U2
1
CC2500_MOD6
U3
1
MX1508
U4
1
CSTE16M
Y1
2
Conn_01x04
J1, J2
1
JST1.0
J4
1
Antenna_Shield
AE1
1
SW_BIND
SW1
1
MTR1A
TP1
1
MTR1B
TP2
1
MTR2A
TP3
1
MTR2B
TP4
1
V+
TP5
1
V-
TP6
1
GREEN
D2
1
RED
D3
1
4u7_0805_16V
C1
1
22u_0603
C2
1
100n_0603
C3
Show 6 more
QtyPartRefs
1
dns_0603
C4
4
47u_0805
C5, C6, C7, C8
1
22K_0603
R1
1
5K_0603
R2
2
10R_2512
R3, R6
3
1K_0603
R4, R5, R7

FRReceiverLVH design files

The KiCad project lives in the shaise/OpenSky328 repository on GitHub; these links point at the commit this page was built from.

FRReceiverLVH: common questions

What microcontroller does the FRReceiverLVH use?

The FRReceiverLVH is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the FRReceiverLVH PCB?

The FRReceiverLVH measures 27.5 × 14.5 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the FRReceiverLVH?

33 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the FRReceiverLVH design files?

From the shaise/OpenSky328 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the FRReceiverLVH design in my own project?

Yes, under the terms of its GPL-3.0 license, which shaise chose for the repository.

Can I test firmware for the FRReceiverLVH without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in OpenSky328

Similar boards