9 open source boards using the MX1508
Real designs built with the MX1508, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
FRReceiverLVH
shaise
27.5 × 14.5 mm33 parts4LGPL-3.013ESP32
Field eyes
louismomo66
118.3 × 68 mm162 parts2LNo license0AVR/Arduino
Line follower
rmingon
93.5 × 97.5 mm84 parts2LNo license0AVR/Arduino
Cat ball
zyyan20h
35 × 34.7 mm31 parts2LNo license4AVR/Arduino
Comparison
zyyan20h
35 × 34.7 mm31 parts2LNo license4ESP8266
App cam roller
zyyan20h
57 × 37 mm22 parts2LNo license4ESP8266
App mistake
zyyan20h
57 × 37 mm21 parts2LNo license4ESP8266
Export
zyyan20h
57 × 37 mm21 parts2LNo license4Recycled driver
chinesejacklee
23.7 × 26.1 mm8 parts2LNo license0
How designs wire the MX1508
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MX1508 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD1 pin has a decoupling capacitor on 3 of 5 designs, most often 47 µF (then 100 nF).
- The VDD2 pin has a decoupling capacitor on 3 of 5 designs, most often 47 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCC1pin 1 | Connected to: 3.3V 100% | — |
| VDD1pin 4 | Connected to: BATT 80% · a signal 20% |
|
| VCC2pin 5 | Connected to: 3.3V 100% | — |
| VDD2pin 8 | Connected to: BATT 80% · a signal 20% |
|
| AGND2pin 10 | Connected to: GND 100% | — |
| PGND2pin 11 | Connected to: GND 100% | — |
| AGND1pin 14 | Connected to: GND 100% | — |
| PGND1pin 15 | Connected to: GND 100% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FRReceiverLVH by shaise, App cam roller by zyyan20h, Recycled driver by chinesejacklee and Field eyes pcb by louismomo66.
The MX1508 in open source designs
The gallery holds 9 open source boards using the MX1508 from 5 GitHub repositories; a typical one measures about 57 × 37 mm and carries around 31 components.
89% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is FRReceiverLVH by shaise.
Parts used alongside the MX1508
Microcontrollers on boards using the MX1508
What boards using the MX1508 are built for
MX1508: common questions
Where can I find a MX1508 reference design?
Each of the 9 boards on this page is a real design using the MX1508. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MX1508 VDD1 pin?
The VDD1 pin has a decoupling capacitor on 3 of 5 designs, most often 47 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the MX1508.
What decoupling capacitors do designs use on the MX1508 VDD2 pin?
The VDD2 pin has a decoupling capacitor on 3 of 5 designs, most often 47 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the MX1508.
Which microcontrollers do boards using the MX1508 use?
Most are built on AVR/Arduino (4), ESP8266 (3) and ESP32 (1).
How big is a typical board using the MX1508?
The median is 57 × 37 mm, and 89% are two-layer designs.
What is the most popular open source board using the MX1508?
By GitHub stars, FRReceiverLVH by shaise, with 13 stars.
Can I simulate one of these boards using the MX1508 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.