BuddyBoard

shasheebhandari·BuddyBoard·table/table.kicad_pcb

BuddyBoard PCB layout, top view — open source ESP32 board by shasheebhandari

About the BuddyBoard PCB

BuddyBoard is an open source ESP32 PCB design by shasheebhandari, published on GitHub. It is a 2-layer board measuring 124.5 × 102 mm, with 16 components from 9 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MPU-6000, XL1509-3.3 and BME680. By type, the board carries 4 ICs, 4 capacitors, 4 resistors and 3 connectors.

It belongs with the iot & wireless, power & battery and sensors designs in this gallery.

From the project

When i was a kind my dad bought me one buddy toy , it had a screen , and a speaker that used to be activated when it was shaken . I was deeply connected to that toy but it got damaged later and i couldn't repair it . So In this project i have tried to re create that toy which use

When i was a kind my dad bought me one buddy toy , it had a screen , and a speaker that used to be activated when it was shaken . I was deeply connected to that toy but it got damaged later and i couldn't repair it . So In this project i have tried to re create that toy which used to display animation in idle but when shaken it used to show time . I am making this project to revive my childhood's fav toy buddy .

BuddyBoard, from the project README
From the project README

Main components on the BuddyBoard

BuddyBoard bill of materials (BOM)

16 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
MPU-6000
U2
1
XL1509-3.3
U3
1
BME680
U4
2
USB_C_Receptacle_down
J1, J2
1
USB_C_Receptacle_up
J3
1
SSD1306
Brd1
4
C
C1, C2, C3, C4
4
R
R1, R2, R3, R4

BuddyBoard design files

The KiCad project lives in the shasheebhandari/BuddyBoard repository on GitHub; these links point at the commit this page was built from.

BuddyBoard: common questions

What microcontroller does the BuddyBoard use?

The BuddyBoard is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the BuddyBoard PCB?

The BuddyBoard measures 124.5 × 102 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BuddyBoard?

16 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the BuddyBoard design files?

From the shasheebhandari/BuddyBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the BuddyBoard design in my own project?

The repository has no license, so all rights stay with shasheebhandari. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BuddyBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards