Bluetooth-Audio-Transmiter
Shashvat1333·Bluetooth-Audio-Transmiter·hardware/Bluetooth-Audio-Transmiter.kicad_pcb
About the Bluetooth-Audio-Transmiter PCB
Bluetooth-Audio-Transmiter is an open source ESP32 PCB design by Shashvat1333, published on GitHub under the MIT license. It is a 2-layer board measuring 107 × 29 mm, with 20 components from 13 distinct parts.
Its main chip is the ESP32-WROOM-32UE, from the ESP32 family. Other key parts include the AP2112K-3.3, CH340C and PCM1808PWR. By type, the board carries 7 capacitors, 5 resistors, 4 ICs, 2 transistors and 2 connectors.
It belongs with the audio, iot & wireless and usb & debug tools designs in this gallery.
From the project
I am making a PCB which allows you to connect to any device that doesn't have Bluetooth like a old TV or a car and connect an external Bluetooth device like you headphones or a speaker.
A custom PCB I designed in KiCad that adds Bluetooth to anything with a headphone jack. Plug in an AUX cable, power it over USB-C, and stream to your wireless headphones.
Lots of good gear has no Bluetooth: an old TV, a record player, a treadmill, a car stereo with an AUX port. I wanted one small board that fixes that, so I designed it myself, from the schematic to the PCB layout.
Main components on the Bluetooth-Audio-Transmiter
Bluetooth-Audio-Transmiter bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM-32UE | ESP32-WROOM-32UE | U3 |
| 1 | PCM1808PWR | TSSOP-14_4.4x5mm_P0.65mm | U4 |
| 2 | BC817 | SOT-23 | Q1, Q2 |
| 1 | SJ-3523-SMT-TR | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J2 |
| 1 | UJ20-C-H-G-SMT-1-P16-TR | SAMESKY_UJ20-C-H-G-SMT-1-P16-TR | J3 |
| 3 | 10μF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C8 |
| 2 | 0.1μF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C9 |
| 2 | 1μF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C6, C7 |
| 2 | 5.1kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 1kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 1 | 10kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
Bluetooth-Audio-Transmiter design files
The KiCad project lives in the Shashvat1333/Bluetooth-Audio-Transmiter repository on GitHub; these links point at the commit this page was built from.
Bluetooth-Audio-Transmiter: common questions
What microcontroller does the Bluetooth-Audio-Transmiter use?
The Bluetooth-Audio-Transmiter is built around the ESP32-WROOM-32UE, from the ESP32 family.
How big is the Bluetooth-Audio-Transmiter PCB?
The Bluetooth-Audio-Transmiter measures 107 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bluetooth-Audio-Transmiter?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bluetooth-Audio-Transmiter design files?
From the Shashvat1333/Bluetooth-Audio-Transmiter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bluetooth-Audio-Transmiter design in my own project?
Yes, under the terms of its MIT license, which Shashvat1333 chose for the repository.
Can I test firmware for the Bluetooth-Audio-Transmiter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k