Homepod
shogunxfortnite-cyber·Homepod·KICAD Files/Homepod.kicad_pcb
About the Homepod PCB
Homepod is an open source ESP32 PCB design by shogunxfortnite-cyber, published on GitHub. It is a 2-layer board measuring 162.6 × 88.9 mm, with 3 components from 3 distinct parts.
Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 2 connectors and 1 IC.
It belongs with the iot & wireless, displays & leds and dev boards & breakouts designs in this gallery.
From the project
It consists of a esp32 s3 n16r8 as its main board.
It consists of a esp32 s3 n16r8 as its main board.
A 2.8inch touch TFT display for smooth navigation.
Also a joystick module for extra navigation specs.
It has a special idle mode and menu in it.
It allows the users to connect to the wifi without editing the code.
The connections for the schematic are like this.
For the joystick we will use Conn01x05Pin.
The PCB is routed like this as shown here.
Main components on the Homepod
Homepod bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DevKitC | ESP32-S3-DevKitC | U1 |
| 1 | Conn_01x14_Pin | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J2 |
Homepod design files
The KiCad project lives in the shogunxfortnite-cyber/Homepod repository on GitHub; these links point at the commit this page was built from.
- LayoutKICAD Files/Homepod.kicad_pcb
- SchematicKICAD Files/Homepod.kicad_sch
Homepod: common questions
What microcontroller does the Homepod use?
The Homepod is built around the ESP32-S3-DevKitC, from the ESP32 family.
How big is the Homepod PCB?
The Homepod measures 162.6 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Homepod?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Homepod design files?
From the shogunxfortnite-cyber/Homepod repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Homepod design in my own project?
The repository has no license, so all rights stay with shogunxfortnite-cyber. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Homepod without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k