HardLabs

FT-32-esp32-s3-dev board-

shubhisgonnastealyourcode·FT-32-esp32-s3-dev-board-

FT-32-esp32-s3-dev board- layout, top view — open source ESP32 board by shubhisgonnastealyourcode

About the FT-32-esp32-s3-dev board-

FT-32-esp32-s3-dev board- is an open source ESP32 PCB design by shubhisgonnastealyourcode, published on GitHub. It is a 2-layer board measuring 61 × 35 mm, with 27 components from 12 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 10 capacitors, 8 resistors, 4 diodes, 3 connectors and 2 ICs.

It belongs with the dev boards & breakouts and displays & leds designs in this gallery.

From the project

Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED

Main components on the FT-32-esp32-s3-dev board-

AMS1117-3.3ESP32-S3-WROOM-1

FT-32-esp32-s3-dev board- bill of materials (BOM)

27 components, 12 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP32-S3-WROOM-1
U5
1
LCD
J2
1
header2
J5
1
header1
J6
1
1N5819HW-7-F
D1
3
LESD5D5.0CT1G
D2, D3, D4
4
10uf
C1, C3, C5, C8
5
0u1F
C2, C4, C6, C7, C10
1
1uf
C9
4
5k1
R1, R2, R6, R9
4
10k
R3, R7, R8, R10

FT-32-esp32-s3-dev board- design files

The KiCad project lives in the shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board- repository on GitHub; these links point at the commit this page was built from.

FT-32-esp32-s3-dev board-: common questions

What microcontroller does the FT-32-esp32-s3-dev board- use?

The FT-32-esp32-s3-dev board- is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the FT-32-esp32-s3-dev board-?

The FT-32-esp32-s3-dev board- measures 61 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FT-32-esp32-s3-dev board-?

27 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the FT-32-esp32-s3-dev board- design files?

From the shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FT-32-esp32-s3-dev board- design in my own project?

The repository has no license, so all rights stay with shubhisgonnastealyourcode. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FT-32-esp32-s3-dev board- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards