SpotifyDevice

Siddarth-Kota·PCB-Projects·SpotifyDevice/SpotifyDevice.kicad_pcb

SpotifyDevice PCB layout, top view — open source ESP32 board by Siddarth-Kota

About the SpotifyDevice PCB

SpotifyDevice is an open source ESP32 PCB design by Siddarth-Kota, published on GitHub. It is a 2-layer board measuring 105.1 × 86.4 mm, with 20 components from 8 distinct parts.

Its main chip is the ESP32-S3-DEVKITC, from the ESP32 family. Other key parts include the 3.5" SPI TFT Display. By type, the board carries 6 diodes, 6 resistors, 5 switches, 2 ICs and 1 capacitor.

Main components on the SpotifyDevice

ESP32-S3-DEVKITC3.5" SPI TFT Display

SpotifyDevice bill of materials (BOM)

20 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DEVKITC
ESP32-S3-DevKitC
U1
1
3.5" SPI TFT Display
U2
5
B3F-4055
S1, S2, S3, S4, S5
1
RED
D1
5
WHITE
D2, D3, D4, D5, D6
1
0.1µF
C1
1
330Ω
R1
5
100Ω
R2, R3, R4, R5, R6

SpotifyDevice design files

The KiCad project lives in the Siddarth-Kota/PCB-Projects repository on GitHub; these links point at the commit this page was built from.

SpotifyDevice: common questions

What microcontroller does the SpotifyDevice use?

The SpotifyDevice is built around the ESP32-S3-DEVKITC, from the ESP32 family.

How big is the SpotifyDevice PCB?

The SpotifyDevice measures 105.1 × 86.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SpotifyDevice?

20 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SpotifyDevice design files?

From the Siddarth-Kota/PCB-Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SpotifyDevice design in my own project?

The repository has no license, so all rights stay with Siddarth-Kota. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SpotifyDevice without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB-Projects

Similar boards