OPAmp
Siddarth-Kota·PCB-Projects·OPAmp PCB/OPAmp PCB.kicad_pcb
About the OPAmp PCB
OPAmp is an open source ESP32 PCB design by Siddarth-Kota, published on GitHub. It is a 2-layer board measuring 83 × 90.2 mm, with 30 components from 19 distinct parts.
Its main chip is the ESP32-POE, from the ESP32 family. Other key parts include the AM2302 and SSD1306. By type, the board carries 12 capacitors, 6 resistors, 5 connectors, 3 ICs, 1 switch and 1 diode.
Main components on the OPAmp
OPAmp bill of materials (BOM)
30 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-POE LM386 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | AM2302 LM386 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | SSD1306 LM386 | DIP-8_W7.62mm_LongPads | U3 |
| 1 | In_L | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | In_R | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | +9V | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J3 |
| 1 | Out_L | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J4 |
| 1 | Out_R | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J5 |
| 2 | R_Potentiometer_Trim_US | Potentiometer_Bourns_3386P_Vertical | RV1, RV2 |
| 1 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | LED | LED_D3.0mm | D1 |
| 2 | 4.7μ | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 3 | 22μ | CP_Radial_D4.0mm_P2.00mm | C3, C4, C5 |
| 3 | 47n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C6, C7, C8 |
| 4 | 470μ | CP_Radial_D10.0mm_P7.50mm | C9, C10, C11, C12 |
| 2 | 68R 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 68R 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
OPAmp design files
The KiCad project lives in the Siddarth-Kota/PCB-Projects repository on GitHub; these links point at the commit this page was built from.
OPAmp: common questions
What microcontroller does the OPAmp use?
The OPAmp is built around the ESP32-POE, from the ESP32 family.
How big is the OPAmp PCB?
The OPAmp measures 83 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OPAmp?
30 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OPAmp design files?
From the Siddarth-Kota/PCB-Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OPAmp design in my own project?
The repository has no license, so all rights stay with Siddarth-Kota. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OPAmp without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in PCB-Projects
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k