Lab Sensor V2
Siddarth-Kota·PCB-Projects·Lab_Sensor_V2/Lab_Sensor_V2.kicad_pcb
About the Lab Sensor V2 PCB
Lab Sensor V2 is an open source ESP32 PCB design by Siddarth-Kota, published on GitHub. It is a 2-layer board measuring 94.3 × 66 mm, with 28 components from 10 distinct parts.
Its main chip is the ESP32-POE, from the ESP32 family. Other key parts include the AM2302, SSD1306 and INMP441. By type, the board carries 15 resistors, 6 diodes, 4 ICs, 2 test points and 1 capacitor.
It belongs with the sensors designs in this gallery, and the repository also holds 1 earlier revision of it.
Main components on the Lab Sensor V2
Lab Sensor V2 bill of materials (BOM)
28 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-POE | ESP32-POE | U1 |
| 1 | AM2302 | ASAIR_AM2302_P2.54mm_Lead2.75mm_TabDown | U2 |
| 1 | SSD1306 | SSD1306 | U3 |
| 1 | INMP441 | INMP441 | U4 |
| 2 | 5002 | 5002 | TP1, TP2 |
| 6 | LED | Standard_LED_Throughhole | D1, D2, D3, D4, D5, D6 |
| 1 | 0.1µF | C_0603_1608Metric | C1 |
| 6 | 68R | R_0603_1608Metric | R1, R2, R3, R4, R10, R12 |
| 8 | 0R | R_0603_1608Metric | R5, R6, R7, R8, R9, R11, R13, R14 |
| 1 | 10K | R_0603_1608Metric | R15 |
Lab Sensor V2 design files
The KiCad project lives in the Siddarth-Kota/PCB-Projects repository on GitHub; these links point at the commit this page was built from.
Lab Sensor V2: common questions
What microcontroller does the Lab Sensor V2 use?
The Lab Sensor V2 is built around the ESP32-POE, from the ESP32 family.
How big is the Lab Sensor V2 PCB?
The Lab Sensor V2 measures 94.3 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lab Sensor V2?
28 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lab Sensor V2 design files?
From the Siddarth-Kota/PCB-Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lab Sensor V2 design in my own project?
The repository has no license, so all rights stay with Siddarth-Kota. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lab Sensor V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in PCB-Projects
Earlier revisions in the repo: Lab_Sensor
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k