HardLabs

SlimeVR board 2-5W

Skaut0071·SlimeVR_Tracker·Board_old/SlimeVR_board_2-5W.kicad_pcb

SlimeVR board 2-5W layout, top view — open source ESP32 board by Skaut0071

About the SlimeVR board 2-5W

SlimeVR board 2-5W is an open source ESP32 PCB design by Skaut0071, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 61 × 50 mm, with 36 components from 22 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the HT7833 and TP4056-ESOP8. By type, the board carries 11 resistors, 10 capacitors, 6 connectors, 4 diodes, 3 ICs and 1 transistor.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations. This repositary contains PCB files for production, also contains all files during developing process.

- Schematic Version: 2.0 - Project Type: DIY/Hobby - Manufacture: JLCPCB

SlimeVR board 2-5W, from the project README
From the project README

Main components on the SlimeVR board 2-5W

HT7833TP4056-ESOP8ESP32-C3-WROOM-02-N4

SlimeVR board 2-5W bill of materials (BOM)

36 components, 22 distinct parts.

QtyPartRefs
1
HT7833
IC1
1
TP4056-ESOP8
U1
1
ESP32-C3-WROOM-02-N4
U2
1
DMP3099L-7
Q1
1
USB_C_Receptacle_USB2.0_16P
J1
1
JST-PH
J2
2
SMD_Pads
J3, J4
2
JTX-HX-A-1
J7, J8
1
LA215009
SW1
1
FYLS-1206URC
D1
1
FYLS-1206PGC
D2
1
FYLS-1206UWC
D3
1
1N4448WSF-7
D4
5
100nF
C1, C2, C4, C5, C10
1
47uF
C3
3
1uF
C6, C8, C9
1
10uF
C7
2
47k
R1, R2
3
5.1k
R3, R4, R11
3
1k
R5, R6, R8
Show 2 more
QtyPartRefs
1
1.2k
R7
2
10k
R9, R10

SlimeVR board 2-5W design files

The KiCad project lives in the Skaut0071/SlimeVR_Tracker repository on GitHub; these links point at the commit this page was built from.

SlimeVR board 2-5W: common questions

What microcontroller does the SlimeVR board 2-5W use?

The SlimeVR board 2-5W is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.

How big is the SlimeVR board 2-5W?

The SlimeVR board 2-5W measures 61 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SlimeVR board 2-5W?

36 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the SlimeVR board 2-5W design files?

From the Skaut0071/SlimeVR_Tracker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the SlimeVR board 2-5W design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which Skaut0071 chose for the repository.

Can I test firmware for the SlimeVR board 2-5W without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in SlimeVR_Tracker

Similar boards