SlimeVR board Conpact
About the SlimeVR board Conpact
SlimeVR board Conpact is an open source ESP32 PCB design by Skaut0071, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 51.8 × 39.5 mm, with 34 components from 20 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the HT7833 and TP4056-42-ESOP8. By type, the board carries 11 resistors, 10 capacitors, 4 connectors, 4 diodes, 3 ICs and 1 transistor.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations. This repositary contains PCB files for production, also contains all files during developing process.
- Schematic Version: 2.0 - Project Type: DIY/Hobby - Manufacture: JLCPCB
Main components on the SlimeVR board Conpact
SlimeVR board Conpact bill of materials (BOM)
34 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HT7833 | SOT-89-3_Handsoldering | IC1 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U2 |
| 1 | DMP3099L-7 | SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | JST-PH | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | SMD_Pads | Pin_1x04_SMD_P2.54mm | J3 |
| 1 | JTX-HX | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J7 |
| 1 | LA215009 | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | FYLS-1206URC | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | FYLS-1206PGC | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | FYLS-1206UWC | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | 1N4148WSQ-7-F | D_SOD-323 | D4 |
| 5 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5, C10 |
| 5 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6, C7, C8, C9 |
| 2 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 3 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R11 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R8 |
| 1 | 1.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
SlimeVR board Conpact design files
The KiCad project lives in the Skaut0071/SlimeVR_Tracker repository on GitHub; these links point at the commit this page was built from.
SlimeVR board Conpact: common questions
What microcontroller does the SlimeVR board Conpact use?
The SlimeVR board Conpact is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the SlimeVR board Conpact?
The SlimeVR board Conpact measures 51.8 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SlimeVR board Conpact?
34 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the SlimeVR board Conpact design files?
From the Skaut0071/SlimeVR_Tracker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SlimeVR board Conpact design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which Skaut0071 chose for the repository.
Can I test firmware for the SlimeVR board Conpact without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in SlimeVR_Tracker
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k