Half-Life---Week-1
Smileydude23·Half-Life---Week-1-PCB·Starbie/Starbie.kicad_pcb
About the Half-Life---Week-1 PCB
Half-Life---Week-1 is an open source ESP32 PCB design by Smileydude23, published on GitHub. It is a 2-layer board measuring 93.7 × 93.7 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
My project for week 1 of Half Life, designing a PCB.
hi this is my first time trying to design a pcb :D Introducing, the Smileybot... It includes a small pet that you can interact with using two buttons. You can activate a play button and it will make a game of pong (FT3). There are also a variety of other options such as feeding and sleeping. I used KICAD to design both the schematic and the model for the PCB The code was created in C++ through arduino IDE Ignore the .CSV file in the Starbie file, it was automatically generated by KICAD and has no role
Main components on the Half-Life---Week-1
Half-Life---Week-1 bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Half-Life---Week-1 design files
The KiCad project lives in the Smileydude23/Half-Life---Week-1-PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutStarbie/Starbie.kicad_pcb
- SchematicStarbie/Starbie.kicad_sch
- BOMStarbie/Starbie.csv
Half-Life---Week-1: common questions
What microcontroller does the Half-Life---Week-1 use?
The Half-Life---Week-1 is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Half-Life---Week-1 PCB?
The Half-Life---Week-1 measures 93.7 × 93.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Half-Life---Week-1?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Half-Life---Week-1 design files?
From the Smileydude23/Half-Life---Week-1-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Half-Life---Week-1 design in my own project?
The repository has no license, so all rights stay with Smileydude23. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Half-Life---Week-1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k