HardLabs

Glycon 02 16

Snektron·glycon·hardware/kicad/glycon_rev1.0/glycon_02_16.kicad_pcb

Glycon 02 16 PCB layout, top view — open source AVR/Arduino board by Snektron

About the Glycon 02 16 PCB

Glycon 02 16 is an open source AVR/Arduino PCB design by Snektron, published on GitHub. It is a 2-layer board measuring 200 × 100 mm, with 46 components from 22 distinct parts.

Its main chip is the Arduino/system bus header, from the AVR/Arduino family. Other key parts include the Z84C3010PEG, Z80CPU, 628128_DIP32_SSOP32, SST39SF010 and 74HC32. By type, the board carries 13 ICs, 13 capacitors, 11 resistors, 4 connectors, 2 transistors and 2 switches.

It belongs with the retro computing designs in this gallery.

From the project

Z80 retro computer

meson ninja or samurai avr-binutils avr-gcc * avr-libc

To use the provided flash target to flash the coprocessor, set the coprocessor port the arduino is connected with by passing -Dport=/dev/ to meson (usually /dev/ttyUSB0) and add yourself to to appropriate groups (typically dialout or uucp).

Main components on the Glycon 02 16

Z84C3010PEGZ80CPU628128_DIP32_SSOP32SST39SF01074HC3274HC0474LS2174LS139Z84C4206PEGPIO-DIP-4074HC244

Glycon 02 16 bill of materials (BOM)

46 components, 22 distinct parts.

QtyPartRefs
1
Z84C3010PEG
CTC-DIP-28
IC2
1
Z80CPU
U0
1
628128_DIP32_SSOP32
U1
1
SST39SF010
U2
1
74HC32
U3
1
74HC04
U4
1
74LS21
U5
1
74LS139
U6
1
Z84C4206PEG
SIO0-DIP-40
U7
2
PIO-DIP-40
U8, U11
2
74HC244
U9, U10
2
IRF9540N
Q1, Q2
1
ACO-6.00MHz
X1
1
Arduino/system bus header
J1
1
PMOD USBUART conn
J2
1
Int order hdr
J3
1
Conn_02x21_Odd_Even
J4
1
SW_Push_Open
SW1
1
SW_Push
SW2
13
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +5
Show 2 more
QtyPartRefs
10
10K
R1, R2, R3, R4, R5, R6, R7, R9 +2
1
1K
R8

Glycon 02 16 design files

The KiCad project lives in the Snektron/glycon repository on GitHub; these links point at the commit this page was built from.

Glycon 02 16: common questions

What microcontroller does the Glycon 02 16 use?

The Glycon 02 16 is built around the Arduino/system bus header, from the AVR/Arduino family.

How big is the Glycon 02 16 PCB?

The Glycon 02 16 measures 200 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Glycon 02 16?

46 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Glycon 02 16 design files?

From the Snektron/glycon repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Glycon 02 16 design in my own project?

The repository has no license, so all rights stay with Snektron. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Glycon 02 16 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in glycon

Similar boards