2 open source boards using the PIO-DIP-40
Real designs built with the PIO-DIP-40, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Z80-MIO
dennis9819
160 × 100.3 mm75 parts2LNo license2
Z80-MIDI
160 × 100.3 mm32 parts2LNo license2
The PIO-DIP-40 in open source designs
The gallery holds 2 open source boards using the PIO-DIP-40 from 1 GitHub repository; a typical one measures about 160 × 100.3 mm and carries around 54 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Z80-MIO by dennis9819.
What boards using the PIO-DIP-40 are built for
PIO-DIP-40: common questions
Where can I find a PIO-DIP-40 reference design?
Each of the 2 boards on this page is a real design using the PIO-DIP-40. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the PIO-DIP-40?
The median is 160 × 100.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the PIO-DIP-40?
By GitHub stars, Z80-MIO by dennis9819, with 2 stars.
Can I simulate one of these boards using the PIO-DIP-40 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.