14 open source boards using the 74AHCT245
Real designs built with the 74AHCT245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Amiga 2000 EATX
jasonsbeer
304.8 × 330.2 mm599 parts4LGPL-3.0199ESP32
Iot thing
mortens-lab
80 × 80 mm58 parts4LMIT516502fast3io
gfoot
99.7 × 80 mm52 parts2LUnlicense7- schematic only · 27 partsESP32
Hub75 controller final
neusse27 parts2LAGPL-3.05 Raspberry Pi
RPi-LED-RGBMatrix-Hat
jrowe88
65 × 30.5 mm28 parts2LNo license2ESP32
Wroom board
SinaKarvandi
100 × 100 mm59 parts4LGPL-3.01ESP32
ESP32
Tanmayeers
100 × 80 mm58 parts4LNo license1ESP32
Aviator
zkeulr
100 × 75 mm39 parts2LGPL-3.01ESP32
IOT-THING
gathonjia-ndungu
95 × 88.1 mm59 parts4LNo license0ESP32
Esp32 iot mortens lab
pravsels
100 × 100 mm58 parts2LNo license0ESP32
Iot thing 11
mortens-lab
80 × 80 mm58 parts4LMIT516502fastbb
gfoot
195.6 × 165.1 mm30 parts2LUnlicense7LED Driver Board
dmc0022
69.2 × 79.9 mm7 parts2LNo license1Raspberry Pi
Adafruit RGB Matrix Bonnet
SoberingRealityCheck
65 × 30.7 mm21 parts2LMIT0
How designs wire the 74AHCT245
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 74AHCT245 connects to, and the resistors, capacitors and other passives placed on it.
- The A->B pin is tied to 5V on 10 of 11 designs.
- The CE pin is tied to GND on 9 of 10 designs.
- The B3 pin has a series resistor on 5 of 10 designs, most often 22 Ω (then 3.3 kΩ).
- The B2 pin has a series resistor on 5 of 10 designs, most often 22 Ω (then 3.3 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A->Bpin 1 | Connected to: 5V 91% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| B3pin 15 | Connected to: A connector 30% |
|
| B2pin 16 | Connected to: A connector 20% |
|
| B1pin 17 | Connected to: A connector 20% · not connected 20% |
|
| B0pin 18 | Connected to: A connector 20% · not connected 20% |
|
| CEpin 19 | Connected to: GND 90% | — |
| VCCpin 20 | Connected to: 5V 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga 2000 EATX by jasonsbeer, Iot thing by mortens-lab, 6502fast3io by gfoot and RPi-LED-RGBMatrix-Hat by jrowe88.
The 74AHCT245 in open source designs
The gallery holds 14 open source boards using the 74AHCT245 from 12 GitHub repositories; a typical one measures about 99.7 × 80 mm and carries around 55 components.
57% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.
The most starred is Amiga 2000 EATX by jasonsbeer.
Parts used alongside the 74AHCT245
Microcontrollers on boards using the 74AHCT245
What boards using the 74AHCT245 are built for
74AHCT245: common questions
Where can I find a 74AHCT245 reference design?
Each of the 14 boards on this page is a real design using the 74AHCT245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74AHCT245 A->B pin connected?
The A->B pin is tied to 5V on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the 74AHCT245.
How is the 74AHCT245 CE pin connected?
The CE pin is tied to GND on 9 of 10 designs. Counted from the KiCad layouts of 11 open source designs using the 74AHCT245.
What resistor goes on the 74AHCT245 B3 pin?
The B3 pin has a series resistor on 5 of 10 designs, most often 22 Ω (then 3.3 kΩ). Counted from the KiCad layouts of 11 open source designs using the 74AHCT245.
What parts are used alongside the 74AHCT245?
The CP2104, ESP32-WROOM-32D, Si7021-A20, USBLC6-2P6 and ESP32-S3-WROOM-1 appear in the most repositories here.
Which microcontrollers do boards using the 74AHCT245 use?
Most are built on ESP32 (8) and Raspberry Pi (2).
How big is a typical board using the 74AHCT245?
The median is 99.7 × 80 mm, and 57% are two-layer designs.
What is the most popular open source board using the 74AHCT245?
By GitHub stars, Amiga 2000 EATX by jasonsbeer, with 199 stars.
Can I simulate one of these boards using the 74AHCT245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.