Capacitive soil sensor panel
SolderedElectronics·Capacitive-soil-sensor-hardware-design·CAD/V2.0.0/PANEL/Capacitive soil sensor_panel.kicad_pcb
About the Capacitive soil sensor panel PCB
Capacitive soil sensor panel is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 6 × 109 mm, with 25 components from 17 distinct parts.
Other key parts include the TLC555CD and SGM358YMS. By type, the board carries 11 resistors, 6 capacitors, 2 ICs, 1 relay and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Capacitive-soil-sensor designed by Soldered Electronics.
How many times have you watered your plants and feared you overdid it? With the capacitive soil sensor, those worries are a thing of the past!
Most cheap soil sensors work on the resistance principle, where there are two prongs and the sensor measures the conductivity between them. They work fine at first, but eventually begin to oxidize due to the exposed metal. Even if they are gold plated! Due to oxidation, the resistance goes up and up, so you have to constantly recalibrate your code. Also, resistance measurements do not always work in loose soil.

Main components on the Capacitive soil sensor panel
Capacitive soil sensor panel bill of materials (BOM)
25 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLC555CD TLC555 | SOIC−8 | U1 |
| 1 | SGM358YMS SGM358YMS/TR | MSOP-8 | U2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | HEADER_MALE_3X1 | HEADER_MALE_3X1 | K1 |
| 2 | PAD_2X1.5 PAD_2x1.5 | PAD_2x1.5 | PAD1, PAD2 |
| 1 | BAT20J | SOD-323 | D1 |
| 1 | 1u | 0603C | C1 |
| 1 | 10N 10n | 0603C | C2 |
| 3 | 100N 100n | 0603C | C3, C7, C8 |
| 1 | 470P 470p | 0603C | C4 |
| 1 | 1M | 0603R | R1 |
| 3 | 10K 10k | 0603R | R2, R5, R9 |
| 1 | 330R | 0603R | R3 |
| 1 | 1K6 | 0603R | R4 |
| 2 | 47K 47k | 0603R | R6, R11 |
| 2 | 100K 100k | 0603R | R7, R10 |
| 1 | TC33X-2-103E tc33x-2-103e | tc33x-2-103e | R8 |
Capacitive soil sensor panel design files
The KiCad project lives in the SolderedElectronics/Capacitive-soil-sensor-hardware-design repository on GitHub; these links point at the commit this page was built from.
Capacitive soil sensor panel: common questions
How big is the Capacitive soil sensor panel PCB?
The Capacitive soil sensor panel measures 6 × 109 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Capacitive soil sensor panel?
25 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Capacitive soil sensor panel design files?
From the SolderedElectronics/Capacitive-soil-sensor-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Capacitive soil sensor panel design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
More boards in Capacitive-soil-sensor-hardware-design
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956