4 open source boards using the SGM358YMS
Real designs built with the SGM358YMS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mynd Main
teufelaudio
75 × 136 mm560 parts4LCC-BY-SA-4.076STM32
Mynd Main
Prototype-Fund-Hardware
75 × 136 mm560 parts4LNo license3Capacitive soil sensor
SolderedElectronics
22 × 109 mm25 parts2LTAPR-OHL-1.03Capacitive soil sensor panel
SolderedElectronics
6 × 109 mm25 parts2LTAPR-OHL-1.03
The SGM358YMS in open source designs
The gallery holds 4 open source boards using the SGM358YMS from 3 GitHub repositories; a typical one measures about 48.5 × 122.5 mm and carries around 293 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Mynd Main by teufelaudio.
Parts used alongside the SGM358YMS
Microcontrollers on boards using the SGM358YMS
SGM358YMS: common questions
Where can I find a SGM358YMS reference design?
Each of the 4 boards on this page is a real design using the SGM358YMS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SGM358YMS?
The BQ25713RSNR, FT24C512A-TSR-T, INA181A1IDBVR, LM51231QRGRRQ1 and PTPS25751SRSMR appear in the most repositories here.
Which microcontrollers do boards using the SGM358YMS use?
Most are built on STM32 (2).
How big is a typical board using the SGM358YMS?
The median is 48.5 × 122.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the SGM358YMS?
By GitHub stars, Mynd Main by teufelaudio, with 76 stars.
Can I simulate one of these boards using the SGM358YMS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.