OpenDrive-Genesis
soniccd123·OpenDrive-Genesis·OpenDrive-Genesis-Develop/OpenDrive-Genesis.kicad_pcb
About the OpenDrive-Genesis PCB
OpenDrive-Genesis is an open source PCB design by soniccd123, published on GitHub. It is a 2-layer board measuring 83.8 × 49.8 mm, with 28 components from 12 distinct parts.
Other key parts include the 74HC74, FM1808B-SG, 74LS139, 29L3211 and 74LS393. By type, the board carries 12 ICs, 9 capacitors, 4 resistors and 3 connectors.
It belongs with the retro computing designs in this gallery.
From the project
A open hardware flashcart for the Sega Genesis/32X
Main components on the OpenDrive-Genesis
OpenDrive-Genesis bill of materials (BOM)
28 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC74 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | FM1808B-SG | SOIC-28W_7.5x17.9mm_P1.27mm | U2 |
| 1 | 74LS139 | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | 29L3211 | PSOP-44_16.9x27.17mm_P1.27mm | U4 |
| 1 | 74LS393 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | 74125 | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 5 | 74LVC8T245 | TSSOP-24_4.4x7.8mm_P0.65mm | U7, U8, U9, U10, U13 |
| 1 | RT9193 | SOT-23-5_HandSoldering | U12 |
| 1 | GENESIS-EDGE | GENESIS-EDGE | CON1 |
| 2 | Conn_01x32_Male | PinSocket_1x32_P2.54mm_Vertical | J1, J2 |
| 9 | C | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C7, C8, C9, C10, C11, C12 +1 |
| 4 | 1K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4 |
OpenDrive-Genesis design files
The KiCad project lives in the soniccd123/OpenDrive-Genesis repository on GitHub; these links point at the commit this page was built from.
OpenDrive-Genesis: common questions
How big is the OpenDrive-Genesis PCB?
The OpenDrive-Genesis measures 83.8 × 49.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OpenDrive-Genesis?
28 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the OpenDrive-Genesis design files?
From the soniccd123/OpenDrive-Genesis repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the OpenDrive-Genesis design in my own project?
The repository has no license, so all rights stay with soniccd123. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k