8 open source boards using the 74LVC8T245
Real designs built with the 74LVC8T245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Amiga gfxcard
mntmn
127 × 96 mm32 parts2LNo license1.0kOpenDrive-Genesis
soniccd123
83.8 × 49.8 mm28 parts2LNo license45FPGA
Spla
khaydarian
165 × 107 mm252 parts4LNo license32FPGA
Controller
westonb
80 × 100 mm198 parts4LNo license13Portapack jawbreaker
dronefpgabasedarchitecture-pizza
93.7 × 73.7 mm65 parts2LGPL-2.07QSIC Prototype 2
dabridgham
214.1 × 131.8 mm71 parts4LNo license11Videoslot
mntmn
100 × 44 mm11 parts2LNo license1.0kClaremontJN
ParadigmHyperloop
72.4 × 43.2 mm23 parts2LCustom license11
How designs wire the 74LVC8T245
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LVC8T245 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 11 is tied to GND on 7 of 7 designs.
- Pin 12 is tied to GND on 7 of 7 designs.
- Pin 13 is tied to GND on 7 of 7 designs.
- Pin 23 is tied to 3.3V on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 71% · a signal 29% |
|
| Pin 2 | Connected to: 74LVC8T245 29%, a connector 29% · 5V 29% |
|
| Pin 11 | Connected to: GND 100% | — |
| Pin 12 | Connected to: GND 100% | — |
| Pin 13 | Connected to: GND 100% | — |
| Pin 22 | Connected to: GND 86% | — |
| Pin 23 | Connected to: 3.3V 100% |
|
| Pin 24 | Connected to: 3.3V 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga gfxcard by mntmn, OpenDrive-Genesis by soniccd123, Spla by khaydarian and Controller by westonb.
The 74LVC8T245 in open source designs
The gallery holds 8 open source boards using the 74LVC8T245 from 7 GitHub repositories; a typical one measures about 96.8 × 84.8 mm and carries around 49 components.
63% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is Amiga gfxcard by mntmn.
Microcontrollers on boards using the 74LVC8T245
What boards using the 74LVC8T245 are built for
74LVC8T245: common questions
Where can I find a 74LVC8T245 reference design?
Each of the 8 boards on this page is a real design using the 74LVC8T245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LVC8T245 pin 11 connected?
Pin 11 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 74LVC8T245.
How is the 74LVC8T245 pin 12 connected?
Pin 12 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 74LVC8T245.
How is the 74LVC8T245 pin 13 connected?
Pin 13 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 74LVC8T245.
Which microcontrollers do boards using the 74LVC8T245 use?
Most are built on FPGA (2).
How big is a typical board using the 74LVC8T245?
The median is 96.8 × 84.8 mm, and 63% are two-layer designs.
What is the most popular open source board using the 74LVC8T245?
By GitHub stars, Amiga gfxcard by mntmn, with 1,020 stars.
Can I simulate one of these boards using the 74LVC8T245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.