Power Distribution V1.1
sOrzada·STASIS_Exposure_Hardware·Power Distribution/PCBs KiCAD/Power_Distribution_V1.1.kicad_pcb
About the Power Distribution V1.1 PCB
Power Distribution V1.1 is an open source PCB design by sOrzada, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 165 × 85 mm, with 61 components from 13 distinct parts.
Other key parts include the 74LVC1G14DBV. By type, the board carries 17 resistors, 8 ICs, 8 relays, 8 diodes, 6 capacitors and 5 crystals.
From the project
This is the repository for the exposition hardware of the STASIS project.
Main components on the Power Distribution V1.1
Power Distribution V1.1 bill of materials (BOM)
61 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 74LVC1G14DBV | SOT23-5_87 | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8 |
| 2 | 2A/20V/150mΩ | SOT26_514 | Q1, Q2 |
| 5 | — | W237-3E_196 | X1, X2, X3, X4, X5 |
| 1 | 5V_IN | 691210910002_16280519 | J1 |
| 2 | DIG_IN | 691210910002_16280519 | J2, J3 |
| 8 | G2RE | G2RE_339 | K1, K2, K3, K4, K5, K6, K7, K8 |
| 4 | — | LED3MM_420 | LED1, LED2, LED3, LED4 |
| 8 | BAT54 | SOT23_210 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 100µF | C1210_334 | C1, C2, C4, C5, C6 |
| 1 | 1µF | C1210_334 | C3 |
| 9 | 47k | R0805_334 | R1, R2, R3, R4, R7, R8, R10, R11 +1 |
| 4 | 180 | R0805_334 | R5, R6, R9, R12 |
| 4 | 470 | R0805_334 | R14, R15, R16, R17 |
Power Distribution V1.1 design files
The KiCad project lives in the sOrzada/STASIS_Exposure_Hardware repository on GitHub; these links point at the commit this page was built from.
Power Distribution V1.1: common questions
How big is the Power Distribution V1.1 PCB?
The Power Distribution V1.1 measures 165 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Distribution V1.1?
61 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power Distribution V1.1 design files?
From the sOrzada/STASIS_Exposure_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power Distribution V1.1 design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which sOrzada chose for the repository.
More boards in STASIS_Exposure_Hardware
Modulator V1p2
sOrzada
160 × 100 mm112 parts6LCERN-OHL-W-2.00Timing Control V1p1
sOrzada
160 × 100 mm101 parts6LCERN-OHL-W-2.00Stripline
sOrzada
450 × 100 mm81 parts2LCERN-OHL-W-2.00Backplane
sOrzada
376 × 128.6 mm75 parts2LCERN-OHL-W-2.00Signal source V1p0
sOrzada
160 × 100 mm63 parts2LCERN-OHL-W-2.00SPI2Parallel v1p1
sOrzada
160 × 100 mm63 parts4LCERN-OHL-W-2.00VoltageControl V1p1
sOrzada
150 × 90 mm55 parts2LCERN-OHL-W-2.00HPA Module V1p1
sOrzada
160 × 100 mm52 parts2LCERN-OHL-W-2.00RF Splitter active
sOrzada
160 × 100 mm19 parts2LCERN-OHL-W-2.00USB2SPI
sOrzada
160 × 100 mm12 parts2LCERN-OHL-W-2.00TR UBL Splitter V1p1
sOrzada
160 × 100 mm9 parts2LCERN-OHL-W-2.00