RF Splitter active
sOrzada·STASIS_Exposure_Hardware·Control System/KiCAD_PCBs/RF_Splitter/RF Splitter active.kicad_pcb
About the RF Splitter active PCB
RF Splitter active is an open source PCB design by sOrzada, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 160 × 100 mm, with 19 components from 8 distinct parts.
Other key parts include the SPLITTER1_4_SCA-4-10+, SMA_CON-H and TQP3M9008SOT-89. By type, the board carries 7 ICs, 6 resistors, 4 capacitors, 1 connector and 1 inductor.
From the project
This is the repository for the exposition hardware of the STASIS project.
This Folder contains the PCBs and Housings for the Control System of the STASIS project's RF exposition system. The PCBs are provided in two different formats: Eagle and KiCAD. The Housings-folder contains .step files for the housings and front panels of the Eurocards.
Main components on the RF Splitter active
RF Splitter active bill of materials (BOM)
19 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPLITTER1_4_SCA-4-10+ | SCA-4-10+ | U$1 |
| 5 | SMA_CON-H | BU-SMA-H | U$2, U$3, U$4, U$5, U$6 |
| 1 | TQP3M9008SOT-89 | SOT89 | U$7 |
| 1 | — | VG64P_79 | J1 |
| 1 | 330nH | L2012C_334 | L1 |
| 2 | 1nF | C0603_334 | C1, C2 |
| 2 | 10nF | C0603_334 | C3, C4 |
| 6 | — | R0603_334 | R1, R2, R3, R4, R5, R6 |
RF Splitter active design files
The KiCad project lives in the sOrzada/STASIS_Exposure_Hardware repository on GitHub; these links point at the commit this page was built from.
RF Splitter active: common questions
How big is the RF Splitter active PCB?
The RF Splitter active measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RF Splitter active?
19 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the RF Splitter active design files?
From the sOrzada/STASIS_Exposure_Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RF Splitter active design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which sOrzada chose for the repository.
More boards in STASIS_Exposure_Hardware
Modulator V1p2
sOrzada
160 × 100 mm112 parts6LCERN-OHL-W-2.00Timing Control V1p1
sOrzada
160 × 100 mm101 parts6LCERN-OHL-W-2.00Stripline
sOrzada
450 × 100 mm81 parts2LCERN-OHL-W-2.00Backplane
sOrzada
376 × 128.6 mm75 parts2LCERN-OHL-W-2.00Signal source V1p0
sOrzada
160 × 100 mm63 parts2LCERN-OHL-W-2.00SPI2Parallel v1p1
sOrzada
160 × 100 mm63 parts4LCERN-OHL-W-2.00Power Distribution V1.1
sOrzada
165 × 85 mm61 parts2LCERN-OHL-W-2.00VoltageControl V1p1
sOrzada
150 × 90 mm55 parts2LCERN-OHL-W-2.00HPA Module V1p1
sOrzada
160 × 100 mm52 parts2LCERN-OHL-W-2.00USB2SPI
sOrzada
160 × 100 mm12 parts2LCERN-OHL-W-2.00TR UBL Splitter V1p1
sOrzada
160 × 100 mm9 parts2LCERN-OHL-W-2.00